AF Number |
75 |
Name |
|
Description |
Sends an acknowledgment to a PPL event request with the status specified in Arg1. |
Arg1 |
<Status> |
Arg2 |
<Not Used> |
AF Number |
76 |
Name |
|
Description |
Stores the ICBs attached to the L4/L5 message into the L4/L5 incoming buffer. A search for an ICB whose message type matches the message type of the prestored parameters specified in Arg1 is invoked. If found, the ICB is concatenated with prestored parameters in the Config Bytes at the index specified by Arg1 and the resulting ICB is placed into the L4 /L5 incoming buffer. If not found, the defaults are copied ‘as is’ into the L4 /L5 incoming buffer. |
Arg1 |
<Config Byte # of Defaults> |
Arg2 |
<Not Used> |
AF Number |
76 |
Name |
|
Description |
Stores the ICBs attached to the L4/L5 message into the L4/L5 incoming buffer. A search for an ICB whose message type matches the message type of the prestored parameters specified in Arg1 is invoked. If found, the ICB is concatenated with prestored parameters in the Config Bytes at the index specified by Arg1 and the resulting ICB is placed into the L4 /L5 incoming buffer. If not found, the defaults are copied ‘as is’ into the L4 /L5 incoming buffer. |
Arg1 |
<Config Byte # of Defaults> |
Arg2 |
<Not Used> |
AF Number |
77 |
Name |
Transfer Network ISUP Raw SS7 Parameters from ISUP Incoming to L4/L5 Outgoing Buffer |
Description |
Transfers the ISUP incoming ICB to the L4/L5 outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
79 |
Name |
Send L4 a Q.931 SETUP using BCD Digits. |
Description |
Sends L4 a Call Setup using any BCD digit string in the L4/L5 outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
80 |
Name |
|
Description |
Sends ISUP a Call Setup Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
81 |
Name |
|
Description |
Sends ISUP an Answer Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
82 |
Name |
|
Description |
Sends ISUP a Release Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
83 |
Name |
|
Description |
Sends ISUP a Release Response using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
84 |
Name |
|
Description |
Sends ISUP a Progress Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
85 |
Name |
|
Description |
Sends ISUP an Alert Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
86 |
Name |
|
Description |
Sends ISUP a Reset response using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
87 |
Name |
|
Description |
Sends ISUP a Maintenance Block response using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
88 |
Name |
|
Description |
Sends ISUP a Maintenance Unblock response using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
89 |
Name |
|
Description |
Sends ISUP a Block Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
90 |
Name |
|
Description |
Sends Layer 4 an Out of Service due to a span alarm. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
91 |
Name |
|
Description |
Sends ISUP an Unblock Request using the SS7 parameters present in the ISUP outgoing buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
92 |
Name |
Send L4 OOS DPC Inaccessible |
Description |
Sends L4 a a channel status of OOS due to a DPC Inaccessible indication. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
94 |
Name |
Send L5 Outseize Control ACK |
Description |
Acknowledges an Outseize Control message with status specified in Arg1. |
Arg1 |
<Status> |
Arg2 |
<Not Used> |
AF Number |
95 |
Name |
|
Description |
Send L4 an Access Denied message with the reason specified in Arg1. The L3 Clear Pending Flag indicates if a Clear is sent to L4. |
Arg1 |
<Reason> |
Arg2 |
<L3 Clear Pending Flag> |
AF Number |
96 |
Name |
|
Description |
Stores any incoming ISUP parameters into the ISUP incoming buffer. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
97 |
Name |
|
Description |
Used to request services as part of a group state machine. Arg1 is used to request different services. |
Arg1 |
<Value> 1 Group Reset 2 Group Block 3 Group Unblock 4 Group Reset Response 5 Group Hardware Block 6 Group Hardware Unblock |
Arg2 |
<Not Used> |
AF Number |
98 |
Name |
Store ISUP Protocol Violation ICB into L4/L5 Outgoing Buffer |
Description |
Used to store the information generated by an ISUP protocol violation in the L4/L5 outgoing buffer for transport to the host as part of a protocol violation PPL Event Indication. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
100 |
Name |
Send ISUP Delete CIC Event |
Description |
Sends ISUP a delete CIC request which forces a CIC to the unequipped (OOS) state. (Minimum Software Version: 5.0) |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
101 |
Name |
|
Description |
Sends ISUP a connect request using the SS7 parameters present in the ISUP outgoing buffer. (Minimum Software Version: 5.0) |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
102 |
Name |
|
Description |
Takes the CIC out of service. (Minimum Software Version: 5.0) |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
103 |
Name |
|
Description |
The Out of Service Operation Flag determines how the CIC will respond to the next transition from Out of Service to In service. (Minimum Software Version: 5.0) |
Arg1 |
<Flag Value> 0x00 - Unblock 0x01 - Reset |
Arg2 |
<Not Used> |
AF Number |
127 |
Name |
|
Description |
This atomic function returns the message ID in the Outseize Control message. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Test AF Results |
PPLevINT_EVENT_1, PPLevINT_EVENT_234 |
AF Number |
128 |
Name |
|
Description |
Sends a CRM request to ISUP with default parameters from configuration or the parameters sent by the host |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
129 |
Name |
|
Description |
Test the status value in the ISUP_CRM_STATUS message. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Test AF Results |
Status event ranging from PPLevINT_EVENT_1 to PPLevINT_EVENT_255 |
AF Number |
130 |
Name |
|
Description |
Send IAM request to ISUP after Circuit Reservation. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
AF Number |
134 |
Name |
|
Description |
Send busy out request to EX/CPU. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Description |
Arguments |
||
|
|
Arg1 (range) |
Arg2 (range) |
109 |
Send msg. to ISUP CCR |
-- |
-- |
110 |
Send msg. to SYM |
-- |
-- |
111 |
Send msg. to ISUP CCO |
-- |
-- |
112 |
Check for Positive status |
-- |
-- |
113 |
Send msg. to ISUP DCO |
-- |
-- |
114 |
Send ISUP CRCS ACK. msg. (ITU only) |
-- |
-- |
115 |
Send ISUP CRCS CPA result (ITU only) |
-- |
-- |
116 |
Send ISUP CRCS stop (ITU) |
-- |
-- |
117 |
Send ISUP CRO stop (ANSI) |
-- |
-- |
118 |
Send SYM Connect Tone msg. |
-- |
-- |
119 |
Send ISUP DCO CPA result |
-- |
-- |
120 |
Send ISUP CCO CPA result |
-- |
-- |
121 |
Send ISUP msg. Req. using outgoing buffer |
Event ID (1 : 78) |
-- |
122 |
Validate and assemble msg. using config. table in L5 incoming buffer |
Cfg. table entry (1 : 50) |
-- |
123 |
Test message ID in PAM |
-- |
-- |
124 |
Send L5 Event Ind. without data |
Event ID. (1 : 255) |
-- |
125 |
Send ISUP CVT request |
msg. offset (1 : 255) |
-- |
126 |
Send ISUP CVT req. for User part test |
msg. offset (1 : 255) |
-- |
AF Number |
160 |
---|---|
Type |
Normal |
Name |
|
Description |
This function will parse through the incoming setup message for the CDPN parameter. When it finds the parameter, it will copy the address signals in the parameter to the Digit_Buffer in the RW area and update the Number_of_Digits parameter in the RW area. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Test AF Results |
<Not Used> |
AF Number |
162 |
---|---|
Type |
Normal |
Name |
|
Description |
This function will parse through the incoming SAM for the Subsequent Address Parameter. This will append the digits in the Subsequent Address Parameter to the Digit_Buffer in the RW area, and update the Number_of_Digits parameter to reflect the new total. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Test AF Results |
<Not Used> |
AF Number |
163 |
---|---|
Type |
Normal |
Name |
|
Description |
This function will copy the digits from the Digit_Buffer to the CDPN parameter in the stored ISUP SETUP message. It will also update the CDPN parameter to reflect the increased length and also update the "Odd/Even" indicator field. |
Arg1 |
<Not Used> |
Arg2 |
<Not Used> |
Test AF Results |
<Not Used> |
AF Number |
164 |
---|---|
Type |
Normal |
Name |
|
Description |
This function will compare the number of digits received with the maximum number of digits to be received. It will also check whether the maximum number of digits can be collected. This is indicated by the fact that the size of the config byte is greater than the normal size of the Digit_Buffer (40 bytes). |
Arg1 |
Configuration byte offset |
|
Input range: 0-600 |
Arg2 |
<Not Used> |
Test AF Results |
<Not Used> |