You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > Resource Attribute Configure 0x00E3
Resource Attribute Configure 0x00E3
SwitchKit Name
ResourceAttributeConfig
Type
EXS API and SwitchKit API message
Description
Use this message to configure attributes on a VDAC-ONE card, IP Network Interface Series 2 card, or a VoIP module.
For VDAC-ONE cards, if a span/channel is active, this message waits until the call ends before updating the configuration.
For IP Network Interface Series 2 cards, you can change the payload size and type during the call.
Sent By
SwitchKit Code
Configuration
ResourceAttributeConfig (
Node = integer,
Slot = integer,
DataType = integer,
TLVCount = integer,
Data = byte array);
C Structure
typedef struct {
UBYTE Slot;
UBYTE DataType;
UBYTE TLVCount;
UBYTE Data[221];
} XL_ResourceAttributeConfig;
C++ Class
class XLC_ResourceAttributeConfig : public XLC_OutboundMessage {
public:
UBYTE getSlot() const;
void setSlot(UBYTE x);
UBYTE getDataType() const;
void setDataType(UBYTE x);
UBYTE getTLVCount() const;
void setTLVCount(UBYTE x);
const UBYTE *getData() const;
UBYTE *getData();
void setData(UBYTE *x);
};
EXS API Hex Format
MESSAGE (White) |
RESPONSE (Gray) |
||
Byte |
Field Description |
Byte |
Field Description |
0 |
Frame (0XFE) |
0 |
Frame (0XFE) |
1, 2 |
Length (0xNNNN) |
1, 2 |
Length (0xNNNN) |
3, 4 |
Message Type (0x00E3) |
3, 4 |
Message Type (0x00E3) |
5 |
Reserved |
5 |
Reserved |
6 |
Sequence Number |
6 |
Sequence Number |
7 |
Logical Node ID |
7 |
Logical Node ID |
8 : |
Address Method 0x00 - Individual AEs |
8, 9 |
|
Number of AEs to follow |
10 |
Checksum |
|
AEs |
|||
: |
Data Type 0x00 - TLVs |
||
: |
Number of TLV blocks to follow |
||
: |
Data (TLVs) 0x0009 Address Element TLV (Required if TLV 0x01E2 below is included in message.) 0x0100 RTP Payload Type (VDAC-ONE) 0x0101 RTP Payload Size (VDAC-ONE) 0x0100 RTP Payload Type (IPN Series 2) 0x0101 RTP Payload Size (IPN Series 2) 0x0102 RTP Silence Suppression 0x01C2 Minimum Jitter Buffer Delay 0x01C3 Maximum Jitter Buffer Delay 0x01C7 Fax/Modem Bypass Coder Type 0x01DF UDP Source Port Validate 0x01E5 VoIP Resource Profile Assign 0x01EB RTP Timer Timeout (VDAC-ONE) 0x01EC Media Inactivity Detection Timer |
||
: |
Checksum |