You are here: CSP Hardware Installation and Maintenance > 4 Card Installation > Card Types
Overview
The cards used in the CSP (CSP 2090, CSP 2110 and CSP 2040) chassis are listed by card type below.
Important! Refer to each cards Hardware Product Description for specific illustrations, compliance, LED descriptions, switch settings, jumper settings, model numbers, and part numbers.
These are the currently available Power Supply cards.
PSC-150 Power card (CSP 2090 and CSP 2110)
PSC-60 Power card (CSP 2040)
CSP Matrix Controller Series 3 Cards
These are the currently available CSP Matrix Controller Series 3 cards.
CSP Matrix Controller Series 3 card
CSP Matrix Controller Series 3 I/O card
These are the currently available Line cards.
DS3 card
DS3 I/O card
DS3 Standby I/O card
E-ONE card
E-ONE 120 Ohm I/O card
E-ONE 120 Ohm Redundant I/O card
E-ONE 120 Ohm Standby I/O card
E-ONE 75 Ohm I/O card
E-ONE 75 Ohm Redundant I/O card
E-ONE 75 Ohm Standby I/O card
J-ONE card
J-ONE Redundant I/O card
J-ONE Standby I/O card
T-ONE card
T-ONE 100 Ohm I/O card
T-ONE 100 Ohm Redundant I/O card
T-ONE 100 Ohm Standby I/O card
Common Channel Signaling (CCS) Cards
These are the currently available CCS cards.
CCS I/O card
CCS I/O Series 3 card
ISDN PRI card
ISDN PRI Redundant I/O card
ISDN Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)
SS7 PQ card (The CCS I/O card is the I/O card for this card.)
SS7 Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)
These are the currently available Resource cards.
DSP-ONE card
Subrate Controller card
DSP Series 2 card
DSP Series 2 Plus card
The following is currently the available EXNETฎ cards.
EXNET-ONE card
Important! EXNET Connectฎ PCI H.100 card The EXNET Connect PCI H.100 card is not supported in Release 8.4.1. Refer to the CSP Technical Publication for Release 8.3.1 for information on this card.
Internet Protocol (IP) Cards
These are the currently available IP cards.
IP Signaling Series 3 card (The CCS I/O Series 3 card is the I/O card for this card.)
VDAC-ONE card
VDAC I/O card
IP Network Interface Series 2 card
Multi-Function Media I/O card
IP Network Interface Series 3 card
Install blockout cards in unoccupied card slots to improve air flow and cooling. Use blockout cards in any unoccupied slot both in front and rear of the CSP chassis.