0x09D1 Global Title Group Query Response
Used in:
SS7 SCCP/TCAP Query message
Byte |
Description |
0, 1 |
Tag 0x09D1 Global Title Group Query Response |
2, 3 |
Length 0x0009
Note: If you attempt to query either a Global Title Group that does not exist, the TLV length in the response will be one byte consisting of null data. |
4 |
Value[0] State 0 Group Idle 1 Group In Service |
5 |
Value[1] Stack ID - State this group belongs to. |
6 |
Value[2] GTI GT Indicator |
7 |
Value[3] TT Translation Type |
8 |
Value[4] NP Numbering Plan |
9 |
Value[5] NAI Nature of Address Indicator |
10 |
Value[6] Minimum Digits - The minimum number |
11 |
Value[7] Maximum Digits - The maximum number of digits the GT Entry of this group contains |
12 |
Value[8] Group Attribute
Bit 0 - Maximum Match 0 Use minimum match rule for this group 1 Use the maximum match rule for this group (best match rule).
Bit 1 - UMTS CG (Not used in current release.) 0 Calling Party address will not be changed when GT translation results are "Route on GT." 1 Calling Party address is changed when GT translation results are "Route on GT." The new calling party address is
Bit 2 - ANSI TT4 0 Not TT4 Type 1 TT4 Type If this bit is set, no GT entry can be added to this group.
Bit 3 - Remove GT 0 Do not remove GT after a successful translation. 1 Remove GT after a successful translation. |