0x0A Activate Ethernet Port (DSP Series 2 Card)
Use this TLV to assign the active Ethernet port for a DSP Series 2 card. If you enable Ethernet Link Redundancy (TLV 0x09), an available standby Ethernet Port is automatically activated upon failure of the active port. This TLV activates the Ethernet Interfaces on the Multi-Function Media I/O card as follows:
• Upper port (NET1)
• Middle port (NET2)
• Lower port (NET3)
Used in:
IP Address Configure message
IP Address Query message
Byte |
Description |
0 |
Tag 0x0A Activate Ethernet Port |
1 |
Length 0x04 |
2-5 |
Value[0] 0x00000001 Upper Port Active (NET1) 0x00000003 Lower Port Active (NET3) |
The two TLVs above (0x09 and 0x0A) are returned in the response to a successful IP Address Query message. If an 0x00FF is returned as the value of the Active Ethernet Port TLV (0x0A) in the response to a IP Address Query message, it indicates that Ethernet Link Redundancy is disabled.