You are here: CSP Developer’s Guide: Overview > 7 Configuring and Using Resources on the DSP Series 2 Cards > Connecting to an ASR with Positive Voice Detection
Connecting to an ASR with Positive Voice Detection
Introduction
NOTE: This feature is not supported in this release.
If you have enabled RTP with the Positive Voice Detection (in the Record File Start 0x011E message), you would start/stop sending RTP packets using the Record File Modify 0x011F message with the following TLVs:
• 0x0689 - Start/Stop Sending RTP Packets
• 0x068A - Calender Time Offset for Sending RTP Packets
Pre-requisite
You must have Positive Voice Detection enabled and implemented. See Implementing Positive Voice Detection/Answering Machine Detection.
Message Sequence