L3P CIC PPL Configuration Bytes (ANSI)
See Important ISUP PPL Information for an explanation of config byte mapping for L3P CIC.
You can modify the parameters for Config Bytes 1-7, but you cannot move them to other byte locations. Other functions in the system access these parameters.
Block 1
|
Byte |
Description |
Value |
|---|---|---|
|
0x01 |
Index to CGB/CGU parameters |
0x0F |
|
0x02 |
Reserved |
0x00 |
|
0x03 |
Index to GRS parameters |
0x1E |
|
0x04 |
Called Party Nature of Address Indicator |
0x01 (Subscriber Number) |
|
0x05 |
Called Party Numbering Plan |
0x50 (Private Numbering Plan) |
|
0x06 |
Calling Party Nature of Address Indicator |
0x01 (Subscriber Number) |
|
0x07 |
Calling Party: Numbering Plan Address Presentation Restriction Indicator Screening Indicator (SI) |
0x55 (Private Numbering Plan, Presentation Restricted, User Provided/Screening Passed) |
|
0x08 |
Request For Service With Data format |
0x00=Raw ISUP (default) 0x01=BCD digit |
|
0x09 |
Unused |
0x00 |
|
0x0A |
CIC Out of Service/In Service Transition Flag |
0x00=OOS Send BLO, INS Send UBL (default) 0x01=OOS No Action, INS Send RLC or GRA 0x02=No Action (default for Exchange Type A) |
|
0x0B |
State Transitions Operation Flag |
0x00=Group Operations (default) 0x01=Individual Operations |
|
0x0C |
Outgoing Congestion Control |
0x00=Disable 0x02=Enable (default) |
|
Circuit Validation Test (CVT) |
||
|
0x0D |
CVT Enable/Disable when UPU Received |
0x00=Disable 0x01=Enable |
|
0x0E |
Host Indication Flag |
0x00=Do Not Send PPL Event to Host 0x01=Send PPL Event to Host (default) |
|
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) |
||
|
0x0F |
Information Length |
0x07 |
|
0x00 |
Message ID |
0x00 (CGB/CGU) |
|
0x11 |
Number of Parameters |
0x02 |
|
0x12 |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
|
0x13 |
Parameter 1 Data Length |
0x00 |
|
0x14 |
Parameter 1 Data[0] |
0x01 (Block with Immediate Release) |
|
0x15 |
Parameter 2 ID |
0x00 (Range & Status) |
|
0x16 |
Parameter 2 Data Length |
0x00 |
|
0x17 |
Priority Call Handling when Outgoing Congestion is true |
0 - Do not allow priority calls |
|
0x18–0x1D |
Unused |
0x00 |
|
Circuit Group Reset (GRS) |
||
|
0x1E |
Information Length |
0x04 |
|
0x1F |
Message ID |
0x00 (GRS) |
|
0x20 |
Number of Parameters |
0x01 |
|
0x21 |
Parameter 1 ID |
0x16 (Range & Status) |
|
0x22 |
Parameter 1 Data Length |
0x00 |
|
0x23 |
ANSI T1.113-1995 indicates the potential presence of an optional parameter called "circuit assignment map" in both Group Reset (GRS) and Group Reset Acknowledgement (GRA) messages. A pointer to optional parameters must be included in all ISUP messages that can contain an optional parameter.By default, the CSP adds this pointer. When connecting to network devices that are using the Pre-1995 format of the GRS / GRA messages, the presence of the pointer can cause problems. In order to not include the pointer on a per CIC basis, set this configuration byte to 0x01. |
0x00 Post-95 (Default) 0x01 Pre-95 |
|
0x24–0x2A |
Unused |
0x00 |
|
0x2B |
Send RFS to host before incoming continuity result is received and connect loopback without OOS. In this case, the host should not try to send any other call processing API on the circuit where an incoming continuity check is being performed, until the continuity check results are received in the form of PPL Event Indication. |
0x00 = Send DS0 status change of Channel Out of Service (Loopback) to the host.
|
|
0x2C-0x31 |
Unused |
0x00 |
|
Address Complete Message (ACM) |
||
|
0x32 |
Information Length |
0x06 |
|
0x33 |
Message ID |
0x06 (ACM) |
|
0x34 |
Number of Parameters |
0x01 |
|
0x35 |
Parameter 1 ID |
0x11 (Backward Call Indicators) |
|
0x36 |
Parameter 1 Data Length |
0x02 |
|
0x37 |
Parameter 1 Data[0] |
0x00 (Charge=No Indication Called Status=No Indication Called Cat=No Indication End-End=No Method) |
|
0x38 |
Parameter 1 Data[1] |
0x04 (Interworking=None Segmentation=None ISUP=All the way Hold=Not required Term Access=Non-ISDN Echo=Not included SCCP Method=No Indication) |
|
0x39–0x40 |
Unused |
0x00 |
|
Answer Message (ANM) |
||
|
0x41 |
Information Length |
0x02 |
|
0x42 |
Message ID |
0x09 (ANM) |
|
0x43 |
Number of Parameters |
0x00 |
|
0x44–0x4A |
Unused |
0x00 |
|
Call Progress (CPG) |
||
|
0x4B |
Information Length |
0x05 |
|
0x4C |
Message ID |
0x2C (CPG) |
|
0x4D |
Number of Parameters |
0x01 |
|
0x4E |
Parameter 1 ID |
0x24 (Event Information) |
|
0x4F |
Parameter 1 Data Length |
0x01 |
|
0x50 |
Parameter 1 Data[0] |
0x02 (Progress) |
|
0x51–0x59 |
Unused |
0x00 |
|
Release (REL) |
||
|
0x5A |
Information Length |
0x06 |
|
0x5B |
Message ID |
0x0C (REL) |
|
0x5C |
Number of Parameters |
0x01 |
|
0x5D |
Parameter 1 ID |
0x12 (Cause Indicators) |
|
0x5E |
Parameter 1 Data Length |
0x02 |
|
0x5F |
Parameter 1 Data[0] |
0x80 (Location=User) |
|
0x60 |
Parameter 1 Data[1] |
0X9F (Cause 31=Normal, Unspecified) |
|
0x61–0x63 |
Unused |
0x00 |
|
Blocking (BLO) |
||
|
0x64 |
Information Length |
0x02 |
|
0x65 |
Message ID |
0x13 (BLO) |
|
0x66 |
Number of Parameters |
0x00 |
|
Unblocking (UBL) |
||
|
0x6E |
Information Length |
0x02 |
|
0x6F |
Message ID |
0x14 (UBL) |
|
0x70 |
Number of Parameters |
0x00 |
|
0x71–0x77 |
Unused |
0x00 |
|
Initial Address Message (IAM) |
||
|
0x78 |
Information Length |
0x21 |
|
0x79 |
Message ID |
0x01 (IAM) |
|
0x7A |
Number of Parameters |
0x04 |
|
0x7B |
Parameter 1 ID |
0x06 (Nature of Connection) |
|
0x7C |
Parameter 1 Data Length |
0x01 |
|
0x7D |
Parameter 1 Data[0] |
0x00 (Satellite=None Continuity Check=Not Required Echo=Not Included) |
|
0x7E |
Parameter 2 ID |
0x07 (Forward Call Indicators) |
|
0x7F |
Parameter 2 Data Length |
0x02 |
|
0x80 |
Parameter 2 Data[0] |
0x20 (Call=National End-End=No Method Interworking=None Segmentation=None ISUP=All the Way Preference=ISUP) |
|
0x81 |
Parameter 2 Data[1] |
0x00 (Original Access=Non-ISDN SCCP Method=No Indication Called Number=No Translate QOR=No Attempt) |
|
0x82 |
Parameter 3 ID |
0x09 (Calling Party Category) |
|
0x83 |
Parameter 3 Data Length |
0x01 |
|
0x84 |
Parameter 3 Data |
0x00 (Unknown) |
|
0x85 |
Parameter 4 ID |
0x1D (User Service Information) |
|
0x86 |
Parameter 4 Data Length |
0x03 |
|
0x87 |
Parameter 4 Data[0] |
0x80 (Coding Standard=ITU-T Information Transfer=Speech) |
|
0x88 |
Parameter 4 Data[1] |
0x90 (Transfer Mode=Circuit Rate=64kbls) |
|
0x89 |
Parameter 4 Data[2] |
0xA2 (User=Layer 1 u-law) |
|
REL (Temp Failure) Parameters |
||
|
0x8A-0x95 |
Unused or User-defined |
|
|
0x96 |
Information Length |
0x06 |
|
0x97 |
Message ID |
0x0C (REL) |
|
0x98 |
Number of Parameters |
0x01 |
|
0x99 |
Parameter 1 ID |
0x12 (Cause Indications) |
|
0x9A |
Parameter 1 Data Length |
0x02 |
|
0x9B |
Parameter 1 Data [0] |
0x80 |
|
0x9C |
Parameter 1 Data [1] |
0xA9 (Temp Failure) |
|
0x9D-0xA6 |
Unused or User-defined |
|
|
0xA7 |
If PPL Event Request of ANM is sent to L3P to automatically put, L4 in the answer state. |
0 - Do not put L4 in answered state automatically (default) 1 - Put L4 in answered state automatically |
|
0xA8-0xC8 |
Unused or User-defined |
|
|
Block 2 |
|
|
|
0x01-0xC8 |
Unused or User-defined |
|
|
Block 3 |
||
|
Information (INF) |
|
|
|
0x01 |
Information Length |
0x06 |
|
0x02 |
Message ID |
0x03 (INR) |
|
0x03 |
Number of Parameters |
0x01 |
|
0x04 |
Parameter 1 ID |
0x0E (Parameter ID) |
|
0x05 |
Parameter 1 Data Length |
0x02 |
|
0x06 |
Parameter 1 Data [0] |
0x01 |
|
0x07 |
Parameter 1 Data [1] |
0x00 |
|
0x0A |
Information Length |
0x06 |
|
0x0B |
Message ID |
0x04 (INF) |
|
0x0C |
Number Of Parameters |
0x01 |
|
0x0D |
Parameter 1 ID |
0x0f (Information Indicator) |
|
0x0E |
Parameter Data Length |
0x02 |
|
0x0F |
Parameter 1 Data[0] |
0x00 Calling Party Address=Not Included Hold=None Calling party Count=Not Included Charge Information=Not Included Information=Solicited |
|
0x10 |
Parameter 1 Data[1] |
0x00 (MC Bus Group=Not Included) |
|
Pass Along Message (PAM) |
||
|
0x14 |
Information Length |
0x02 |
|
0x15 |
Message ID |
0x28 (PAM) |
|
0x16 |
Number of Parameters |
0x00 |
|
Facility (FAC) |
||
|
0x19 |
Information Length |
0x02 |
|
0x1A |
Message ID |
0x33 (FAC) |
|
0x1B |
Number Of Parameters |
0x00 |
|
|
CVT |
|
|
0x1E |
Information Length |
0x02 |
|
0x1F |
Message ID |
0xEC (CVT) |
|
0x20 |
Number of Parameters |
0x00 |
|
Circuit Query Message (CQM) |
||
|
0x28 |
Information Length |
0x04 |
|
0x29 |
Message ID |
0x00 (CQM) |
|
0x2A |
Number Of Parameters |
0x01 |
|
0x2B |
Parameter 1 ID |
0x16 (Range and Status) |
|
0x2C |
Parameter 1 Data Length |
0x00 |
|
Circuit Reservation Message (CRM) |
||
|
0x32 |
Information Length |
0x05 |
|
0x33 |
Message ID |
0xEA (CRM) |
|
0x34 |
Number of Parameters |
0x01 |
|
0x35 |
Parameter 1 ID |
0x06 (Nature of Connection) |
|
0x36 |
Parameter 1 Data Length |
0x01 |
|
0x37 |
Parameter 1 Data [0] |
0x00 (Satellite=None Continuity Check=Not Required Echo=Not Included) |
|
Circuit Reservation Acknowledgment CRA) |
||
|
0x3C |
Information Length |
0x02 |
|
0x3D |
Message ID |
0xE9 (CRA) |
|
0x3E |
Number of Parameters |
0x00 |
|
Exit Message (EXM) |
||
|
0x41 |
Information Length |
0x02 |
|
0x42 |
Message ID |
0xED (EXM) |
|
0x43 |
Number of Parameters |
0x00 |
|
Forward Transfer (FOT) |
||
|
0x46 |
Information Length |
0x02 |
|
0x47 |
Message ID |
0x08 (FOT) |
|
0x48 |
Number of Parameters |
0x00 |
|
Suspend (SUS) |
||
|
0x50 |
Information Length |
0x05 |
|
0x51 |
Message ID |
0x0D (SUS) |
|
0x52 |
Number Of Parameters |
0x01 |
|
0x53 |
Parameter 1 ID |
0x22 (Suspend/Resume Indicator) |
|
0x54 |
Parameter 1 Data Length |
0x01 |
|
0x55 |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
|
Resume (RES) |
||
|
0x5A |
Information Length |
0x05 |
|
0x5B |
Message ID |
0x0E (RES) |
|
0x5C |
Number Of Parameters |
0x01 |
|
0x5D |
Parameter 1 ID |
0x22 (Suspend/Resume Indicator) |
|
0x5E |
Parameter 1 Data Length |
0x01 |
|
0x5F |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
Block 3 With Index Table
Config Byte Block 3 is used for the config byte range of 400-600, where the offset table resides
|
Index |
Message |
Config Byte |
Value |
|---|---|---|---|
|
1 |
Misc. Info |
0x65 |
1 (Offset Block No.) |
|
|
|
0x66 |
0x01 (Offset Range: 0x01-0x0E) |
|
2 |
ACM |
0x67 |
1 (Offset Block No.) |
|
|
|
0x68 |
0x32 (Offset Range: 0x32-0x38) |
|
3 |
ANM |
0x69 |
1 (Offset Block No.) |
|
|
|
0x6A |
0x41 (Offset Range: 0x41-0x43) |
|
4 |
CPG |
0x6B |
1 (Offset Block No.) |
|
|
|
0x6C |
0x4B (Offset Range: 0x4B-0x50) |
|
5 |
REL |
0x6D |
1 (Offset Block No.) |
|
|
|
0x6E |
0x5A (Offset Range: 0x5A-0x60) |
|
6 |
BLO |
0x6F |
1 (Offset Block No.) |
|
|
|
0x70 |
0x64F (Offset Range: 0x64-0x66) |
|
7 |
UBL |
0x71 |
1 (Offset Block No.) |
|
|
|
0x72 |
0x6E (Offset Range: 0x6E-0x70) |
|
8 |
IAM |
0x73 |
1 (Offset Block No.) |
|
|
|
0x74 |
0x78 (Offset Range: 0x78-0x88) |
|
9 |
CQM |
0x75 |
3 (Offset Block No.) |
|
|
|
0x76 |
0x28 (Offset Range: 0x28-0x2C) |
|
10 |
INR |
0x77 |
3 (Offset Block No.) |
|
|
|
0x78 |
0x01 (Offset Range: 0x01-0x08) |
|
11 |
INF |
0x79 |
3 (Offset Block No.) |
|
|
|
0x7A |
0x0A (Offset Range: 0x0A-0x12) |
|
12 |
PAM |
0x7B |
3 (Offset Block No.) |
|
|
|
0x7C |
0x14 (Offset Range: 0x14-0X16) |
|
13 |
FAC |
0x7D |
3 (Offset Block No.) |
|
|
|
0x7E |
0x19 (Offset Range: 0x19-0x1B) |
|
14 |
CVT |
0x7F |
3 (Offset Block No.) |
|
|
|
0x80 |
0x1E (Offset Range: 0x1E-0x20) |
|
15 |
SUS |
0x81 |
3 (Offset Block No.) |
|
|
|
0x82 |
0x50 (Offset Range: 0x50--0X55) |
|
16 |
RES |
0x83 |
3 (Offset Block No.) |
|
|
|
0x84 |
0x5A (Offset Range: 0x5A-0x5F) |
|
17 |
CRM |
0x85 |
3 (Offset Block No.) |
|
|
|
0x86 |
0x03 (Offset Range: 0x32-0x37) |
|
18 |
CRA |
0x87 |
3 (Offset Block No.) |
|
|
|
0x88 |
0x03 (Offset Range: 0x3C-0x3E) |
|
19 |
EXM |
0x89 |
3 (Offset Block No.) |
|
|
|
0x8A |
0x03 (Offset Range: 0x41-0x44) |
|
20 |
FOT |
0x8B |
3 (Offset Block No.) |
|
|
|
0x8C |
0x03 (Offset Range: 0x46-0x48) |
|
21 |
COT |
0x8D |
3 (Offset Block No.) |
|
|
|
0x8E |
0x03 (Offset Range: 0x23-0x25) |
|
22 |
REL |
0x8F |
3 (Offset Block No.) |
|
|
|
0x90 |
0x01 (Offset Range: 0x96-0x9C) |