0x01E5 VoIP Resource Profile Assign
The Resource Profile Assign (0x01E5) TLV has been created to configure a module’s resource profile. Similar to changing the Gateway Mode, changing a VoIP module resource profile causes its TDM resources to change, causing the IP Network Interface Series 2 card to reset, so that new resources can be allocated.
Important! Changing the resource profile on any module causes the IP Network Interface Series 2 card host configuration to be reset.
You cannot mix VoIP resource profiles on the same
IP Network Interface Series 2 card or in the same chassis.
The Resource Profile Assign (0x01E5) TLV addresses the VoIP module by its module number. Since updating a VoIP module’s profile causes the IP Network Interface Series 2 card to reset, all of the modules can be reset in a single message.
The host has the flexibility to send one VoIP Resource Profile Assign TLV to assign the same resource profile to all modules or send multiple TLVs to individual modules. If any TLV is invalid, the message is negatively acknowledged (NACKED) and no action is taken.
Used in:
Resource Attribute Configure message
|
Byte |
Description |
|
0, 1 |
Tag VoIP Resource Profile Assign (0x01E5) |
|
2, 3 |
Length 0x0003 |
|
4 |
Value : Data [0] Module Number 0x01 Module 2 0xFF All Populated VoIP Modules |
|
5 |
Value : Data [1] Profile Number 0x02 Profile 2 (IP Network Interface Series 2 - VDAC-ONE 0x04 Profile 4 (IP Network Interface Series 3 - G.711 Only) 0x05 Profile 5 (IP Network Interface Series 3 - LBR+T.38) |
|
6 |
Value : Data [2] Force Flag 0xFF Update Unconditionally |