Use this TLV to specify the remote T.38 port number for the fax relay. This TLV can be set on-the-fly. There is no default value for this TLV (i.e., no default T.38 port will be assumed). Therefore is imperative for the Host to resolve this port number as early as possible to ensure the proper fax relay operation. If this port number is not specified (in time), the fax relay will fail.
Used in:
0x1E Generic PPL ICB in:
Resource Attribute Configure message
Route Control message
Outseize Control message
Byte |
Description |
0, 1 |
Tag 0x01E7 |
2, 3 |
Length 0x0002 |
4, 5 |
Value[0, 1] T.38 Port |