ISUP CPC Configuration Bytes (ITU)
Block 1
Byte |
Description |
Value |
---|---|---|
0x01 |
Dual-seizure Control Flag
|
0x00 Drop Outgoing Call 0x01 Drop Incoming Call 0x02 Drop Incoming Call if OPC is less than DPC and CIC is odd, or OPC is greater than DPC and CIC is even (see Q.767 D2.10.1.4) (default) |
0x02 |
Incoming Congestion Control |
0x00=Disable 0x01=Enable (default) |
0x03 |
User Part Test Retry Count |
4 (default) |
0x04 |
Outgoing SGM required |
0=Outgoing SGM not required (default) 1=Outgoing SGM required |
Overload Message (OLM) |
||
0x05 |
REL/OLM Selection |
0x00=Send REL upon detecting incoming congestion (default) 0x01=Send OLM upon detecting incoming congestion |
Unrecognizable Parameter Processing |
||
0x06 |
Parameter Compatibility Parameter Handling |
0x00=PCP Handling Disabled 0x01=PCP Handling Enabled (Default) |
0x07 |
Unrecognized Parameter Pass On |
0x00=Pass On Not Possible 0x01=Pass On Is Possible (Default) |
0x08 |
Reserved |
0x00 |
0x09 |
Send RFS to host after incoming continuity result is received. |
0x00 = Send RFS after Continuity has been performed
|
Release (REL) for T8 Expiration |
||
0x0A |
Information Length |
0x06 |
0x0B |
Message ID |
0x0C (REL) |
0x0C |
Parameter Count |
0x01 |
0x0D |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x0E |
Parameter 1 Data Length |
0x02 |
0x0F |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x10 |
Parameter 1 Data[1] |
0xA9 (Cause 41=Resource Unavailable, Temp Failure) |
0x11 |
T7/T9 Timer Expired. Send Event Indication. |
0x00=Disabled (default) 0x01=Enabled |
Release (REL) for Call Modification Complete (CMC) |
||
0x12 |
Information Length |
0x06 |
0x13 |
Message ID |
0x0C (REL) |
0x14 |
Parameter Count |
0x01 |
0x15 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x16 |
Parameter 1 Length |
0x02 |
0x17 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x18 |
Parameter 1 Data[1] |
0xE6 (Recovery on Timer Expiry) |
Release (REL) for Unexpected RLC Received |
||
0x19 |
Information Length |
0x06 |
0x1A |
Message ID |
0x0C (REL) |
0x1B |
Parameter Count |
0x01 |
0x1C |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x1D |
Parameter 1 Data Length |
0x02 |
0x1E |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x1F |
Parameter 1 Data[1] |
0xA9 (Cause 41=Resource Unavailable, Temp Failure) |
Release (REL) for Normal L3P |
||
0x20 |
Information Length |
0x06 |
0x21 |
Message ID |
0x0C (REL) |
0x22 |
Parameter Count |
0x01 |
0x23 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x24 |
Parameter 1 Length |
0x02 |
0x25 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x26 |
Parameter 1 Data[1] |
0x90 (Normal Release) |
0x27 |
Unused |
|
Release (REL) for BLK in Wait for ACM State |
||
0x28 |
Information Length |
0x06 |
0x29 |
Message ID |
0x0C (REL) |
0x2A |
Parameter Count |
0x01 |
0x2B |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x2C |
Parameter 1 Data Length |
0x02 |
0x2D |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x2E |
Parameter 1 Data[1] |
0xA9 (Cause 41=Resource Unavailable, Temp Failure) |
0x2F–0x36 |
Unused |
|
Release (REL) for Congestion |
||
0x37 |
Information Length |
0x09 |
0x38 |
Message ID |
0x0C (REL) |
0x39 |
Number of default parameters |
0x02 |
0x3A |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x3B |
Parameter 1 Data Length |
0x02 |
0x3C |
Parameter 1 data[0] |
0x80 (Location=User) |
0x3D |
Parameter 1 data[1] |
0xAA (Cause 42=Resource Unavailable, Switching Equipment Congestion) |
0x3E |
Parameter 2 ID |
0x27 (Automatic Congestion Level) |
0x3F |
Parameter 2 Data Length |
0x01 |
0x40 |
Parameter 2 Data[0] |
0x02 (Automatic Congestion Level 2) |
0x41–0x45 |
Unused |
|
Release (REL) for T7 Expiration |
||
0x46 |
Information Length |
0x06 |
0x47 |
Message ID |
0x0C (REL) |
0x48 |
Number of default parameters |
0x01 |
0x49 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x4A |
Parameter 1 Data Length |
0x02 |
0x4B |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x4C |
Parameter 1 Data[1] |
0xA9 (Temp Failure) |
Release (REL) for T9 Expiration |
||
0x55 |
Information Length |
0x06 |
0x56 |
Message ID |
0x0C (REL) |
0x57 |
Parameter Count |
0x01 |
0x58 |
Parameter ID |
0x12 (Cause Indicators) |
0x59 |
Parameter 1 Length |
0x02 |
0x58 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x59 |
Parameter 1 Data[1] |
0xA9 (Temp Failure) |
Call Modification Reject (CMRJ) |
||
0x5C |
Information Length |
0x05 |
0x5D |
Message ID |
0x1E (CMRJ) |
0x5E |
Parameter Count |
0x01 |
0x5F |
Parameter 1 ID |
0x17 (Call Modification Indicator) |
0x60 |
Parameter 1 Length |
0x01 |
0x61 |
Parameter 1 Data[0] |
0x01 |
Continuity (COT) |
||
0x64 |
Information Length |
0x04 |
0x65 |
Message ID |
0x05 (COT) |
0x66 |
Parameter Count |
0x01 |
0x67 |
Parameter ID |
0x12 (Cause Indicators) |
0x69 |
Parameter Length |
0x00 |
Release (REL) for T33 Expiration |
||
0x6E |
Information Length |
0x06 |
0x6F |
Message ID |
0x0C (REL) |
0x70 |
Parameter Count |
0x01 |
0x71 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x72 |
Parameter 1 Length |
0x02 |
0x73 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x74 |
Parameter 1 Data[1] |
0x9F (Normal Unspecified) |
Release (REL) for T2 Expiration |
||
0x82 |
Length of the data |
0x06 |
0x83 |
Message ID |
0x0C MCP/PCP |
0x84 |
Parameter Count |
0x01 |
0x85 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x86 |
Parameter 1 Length |
0x02 |
0x87 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0x88 |
Parameter 1 Data[1 |
0xE6 (Cause 102=Protocol Error, Recovery on Timer Expiration) |
Release (REL) for PCP |
||
0x8C |
Information Length |
0x06 |
0x8D |
Message ID |
0x0C (REL) |
0x8E |
Parameter Count |
0x01 |
0x8F |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x90 |
Parameter 1 Length |
0x02 |
0x91 |
Parameter 1 Data [0] |
0x80 (Location=User) |
0x92 |
Parameter 1 Data [1] |
0xE3 (Cause 99=Protocol Error, IE or Parameter Not Implemented, Discarded) |
Confusion (CFN) for PCP |
||
0x96 |
Information Length |
0x06 |
0x97 |
Message ID |
0x2F (CFN) |
0x98 |
Parameter Count |
0x01 |
0x99 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0x9A |
Parameter 1 Length |
0x02 |
0x9B |
Parameter 1 Data[0] |
0x80 |
0x9C |
Parameter 1 Data[1] |
0xE3 (Cause 99=Protocol Error, IE or Parameter Not Implemented, Discarded) |
Confusion (CFN) with Unrecognized Parameters |
||
0xA0 |
Information Length |
0x06 |
0xA1 |
Message ID |
0x2F (CFN) |
0xA2 |
Parameter Count |
0x01 |
0xA3 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0xA4 |
Parameter 1 Length |
0x02 |
0xA5 |
Parameter 1 Data [0] |
0x80 (Location=User) |
0xA6 |
Parameter 1 Data [1] |
0xEE (Cause 110=Protocol Error, Message with Unrecognized Parameters, Discarded) |
Facility Reject (FRJ) for PCP |
||
0xAA |
Information Length |
0x09 |
0xAB |
Message ID |
0x21 (FRJ) |
0xAC |
Parameter Count |
0x02 |
0xAD |
Parameter 1 ID |
0x18 (Facility Indicator) |
0xAE |
Parameter 1 Length |
0x01 |
0xAF |
Parameter 1 Data [0] |
0x02 (User-to-User Service) |
0xB0 |
Parameter 2 ID |
0x12 (Cause Indicators) |
0xB1 |
Parameter 2 Length |
0x02 |
0xB2 |
Parameter 2 Data [0] |
0x80 (Location=User) |
0xB3 |
Parameter 2 Data [1] |
0xE3 (Cause 99=Protocol Error, IE or Parameter Not Implemented, Discarded) |
Release Complete (RLC) for PCP |
||
0xB4 |
Information Length |
0x06 |
0xB5 |
Message ID |
0x10 (RLC) |
0xB6 |
Parameter Count |
0x01 |
0xB7 |
Parameter 1 ID |
0x12 (Cause Indicators) |
0xB8 |
Parameter 1 Length |
0x02 |
0xB9 |
Parameter 1 Data[0] |
0x80 (Location=User) |
0xBA |
Parameter 1 Data [1] |
0xE3 (Cause 99=Protocol Error, IE or Parameter Not Implemented, Discarded) |
0xBB |
Length of the Data Structure |
0x06 |
User Part Available (UPA) |
||
0xBE |
Information Length |
0x06 |
0xBF |
Message ID |
0x35 (UPA) |
0xC0 |
Parameter Count |
0x01 |
0xC1 |
Parameter 1 ID |
0x39 (Parameter Compatibility Information) |
0xC2 |
Parameter 1 Length |
0x02 |
0xC3 |
Parameter 1 Data[0] |
0x00 |
0xC4 |
Parameter Data[1] |
0x00 (End Node Interp, Do Not Release, Do Not Notify, Discard Message, Discard Parameter) |
Block 2
Value |
Description |
Value |
---|---|---|
Miscellaneous Information |
||
0x01 |
In-call Modification |
0=Not Allowed 1=Allowed (default) |
0x02 |
Release call on Timeout |
0=Don’t Release Call 1=Release Call (default) |
0x03 |
Continuity Control |
0=In-switch Continuity enabled (default) 1=Host Controlled Continuity enabled |
0x0A |
Sending SAM to Host/L3P CIC Note: If you change this byte to 0x01, you must also set component 0x000F, byte 0x30, Block 0x01 to value 0x01 |
0x00=Send to Host (default) 0x01=Send to L3P CIC |