L3P CIC Configuration Bytes (ITU)
The table below shows the ITU PPL Configuration Byte values for the L3P CIC component. See Important ISUP PPL Information for an explanation of config byte mapping for L3P CIC.
You can modify the parameters for Config Bytes 1-7, but you cannot move them to other byte locations. Other functions in the system access these parameters.
Block 1
|
Byte |
Description |
Value |
|---|---|---|
|
0x01 |
Index to CGB/CGU parameters |
0x0F |
|
0x02 |
Index to Hardware CGB/CGU parameters |
0x19 |
|
0x03 |
Index to GRS parameters |
0x22 |
|
0x04 |
Called Party Nature of Address Indicator |
0x03 (Subscriber Number) |
|
0x05 |
Called Party Numbering Plan |
0x10 (Private Numbering Plan) |
|
0x06 |
Calling Party Nature of Address Indicator |
0x00 (Subscriber Number) |
|
0x07 |
Calling Party: Numbering Plan Address Presentation Restriction Indicator Screening Indicator (SI) |
0x15 (Private Numbering Plan, Presentation Restricted, User Provided/Screening Passed) |
|
0x08 |
Request For Service With Data format |
0x00=Raw ISUP (default) 0x01=BCD digits |
|
0x09 |
Incoming Call Processing Option |
0x00=ACM/ANM (default) 0x01=CON |
|
0x0A |
CIC Out of Service/In Service Transition Flag |
0x00=OOS Send BLO, INS Send UBL (default) 0x01=OOS No Action, INS Send RSC 0x02=No Action (default for Exchange Type A) |
|
0x0B |
State Transitions Operation Flag |
0x00=Group Operations (default) 0x01=Individual Operations |
|
0x0C |
Outgoing Congestion Control |
0x00=Disable 0x02=Enable (default) |
|
Miscellaneous Configuration |
||
|
0x0D
|
Misc. Config Byte: Send UPT automatically upon UPU from MTP |
00=Do not send UPT 01=Send UPT automatically |
|
0x0E |
Host Indication Flag |
0x00=Do Not Send PPL Event to Host 0x01=Send PPL Event to Host (default) |
|
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) (Maintenance) |
||
|
0x0F |
Information Length |
0x07 |
|
0x10 |
Message ID |
0x00 (CGB/CGU) |
|
0x11 |
Number of Parameters |
0x02 |
|
0x12 |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
|
0x13 |
Parameter 1 Data Length |
0x01 |
|
0x14 |
Parameter 1 Data [0] |
0x00 (Block with Immediate Release) |
|
0x15 |
Parameter 2 ID |
0x16 (Range & Status) |
|
0x16 |
Parameter 2 Data Length |
0x00 |
|
0x17 |
Priority Call Handling when Outgoing Congestion is true |
0 - Do not allow priority calls |
|
0x18 |
Unused |
0x00 |
|
Circuit Group Blocking/Circuit Group Unblocking (CGB/CGU) (Hardware) |
||
|
0x19 |
Information Length |
0x07 |
|
0x1A |
Message ID |
0x00 (CGB/CGU) |
|
0x1B |
Number of Parameters |
0x02 |
|
0x1C |
Parameter 1 ID |
0x15 (C.G.S.M.T. Indicator) |
|
0x1D |
Parameter 1 Data Length |
0x01 |
|
0x1E |
Hardware Orientation |
0x01 |
|
0x1F |
Parameter 1 ID |
0x16 (Range & Status) |
|
0x20 |
Parameter 2 Data Length |
0x00 |
|
0x21 |
Unused |
0x00 |
|
Circuit Group Reset (GRS) |
||
|
0x22 |
Information Length |
0x04 |
|
0x23 |
Message ID |
0x00 = Behavior determined by this configuration byte and is pre-95 ANSI. 0x01 = Behavior is determined by the Message Configuration Template by default. |
|
0x24 |
Number of Parameters |
0x01 |
|
0x25 |
Parameter 1 ID |
0x16 (Range & Status) |
|
0x26 |
Parameter 1 Data Length |
0x00 |
|
0x29 |
PPL Event Indications sent to the host for ACM/ANM. |
0x00* = Send 0x01 = Do not send |
|
0x2B |
Send RFS to host before incoming Continuity result is received and connect loopback without OOS. In this case, the host should not try to send any other call processing API on the circuit where incoming Continuity Check is being performed, until continuity check results are received in the form of PPL Event Indication. |
0x00 = Send DS0 status change of Channel Out of Service (Loopback) to the host.
|
|
0x2C |
Determines whether the outgoing channel receives the Channel Release with Data (0x0069) message when the outgoing channel is released by the other end before the Address Complete Message (ACM). |
0x00=Receive Channel Release with Data (0x0069) (default) 0x01=Does not receive Channel Release with Data (0x0069) |
|
0x2D |
Determines whether Outseize ACK message is sent before or after the Address Complete Message (ACM). |
0x00=Sent after ACM 0x01=Sent before ACM |
|
0x2E |
Determines whether SS7 Address Information is sent to Layer 4. |
0x00=Not sent 0x01=Sent |
|
0x2F |
Determines whether to re-transmit the Blocking (BLO) message when the RSC is sent to a LO BLO circuit. |
0x00=Re-transmits |
|
0x30 |
Determines whether the SAM in the RFS feature is enabled. Note: If you change this byte to 0x01, you must also set component 0x0012, Block 2, byte 0x0A to value 0x01 |
0x00=Disabled (default) 0x01=Enabled |
|
0x31 |
Maximum digits to be collected, excluding the "End of Dialing/digits" signal [i.e., Signal Terminator (ST)] |
Recommended range: 0x00-0x28 (The Digit_Buffer has 80 digit maximum.) 0x0A (Default) |
|
0x32 |
ST digit value |
0x0F (default) |
|
0x33-0x36 |
Unused |
|
|
Address Complete Message (ACM) |
||
|
0x3C |
Information Length |
0x06 |
|
0x3D |
Message ID |
0x06 (ACM) |
|
0x3E |
Number of Parameters |
0x01 |
|
0x3F |
Parameter 1 ID |
0x11 (Backward Call Indicators) |
|
0x40 |
Parameter 1 Data Length |
0x02 |
|
0x41 |
Parameter 1 Data[0] |
0x00 (Charge=No Indicator Called Status=No Indicator Called Count=No Indicator End-End=No Method) |
|
0x42 |
Parameter 1 Data[1] |
0x04 (Interworking=None Segmentation=None ISUP=All the Way Hold=Not Required Term Access=Non-ISDN Echo=Not Included SCCP Method=No Indicator) |
|
0x43–0x45 |
Unused |
0x00 |
|
Answer Message (ANM) |
||
|
0x46 |
Information Length |
0x02 |
|
0x47 |
Message ID |
0x09 (ANM) |
|
0x48 |
Number of Parameters |
0x00 |
|
0x49–0x4A |
Unused |
0x00 |
|
Call Progress (CPG) |
||
|
0x4B |
Information Length |
0x05 |
|
0x4C |
Message ID |
0x2C (CPG) |
|
0x4D |
Number of Parameters |
0x01 |
|
0x4E |
Parameter 1 ID |
0x24 (Event Information) |
|
0x4F |
Parameter 1 Data Length |
0x01 |
|
0x50 |
Parameter 1 Data[0] |
0x02 (Progress) |
|
0x51–0x54 |
Unused |
0x00 |
|
Connect (CON) |
||
|
0x55 |
Information Length |
0x06 |
|
0x56 |
Message ID |
0x07 (CON) |
|
0x57 |
Number of Parameters |
0x01 |
|
0x58 |
Parameter 1 ID |
0x11 (Backward Call Indicator) |
|
0x59 |
Parameter 1 Data Length |
0x02 |
|
0x5A |
Parameter 1 Data[0] |
0x00 (Charge=No Indicator Called Status=No Indicator Called Count=No Indicator End-End=No Method) |
|
0x5B |
Parameter 1 Data[1] |
0x14 (Interworking=None Segmentation=None ISUP=All the Way Hold=Not Required Term Access=ISDN Echo=Not Included SCCP Method=No Indicator) |
|
0x5C–0x5E |
Unused |
0x00 |
|
Release (REL) |
||
|
0x5F |
Information Length |
0x06 |
|
0x60 |
Message ID |
0x0C (REL) |
|
0x61 |
Number of Parameters |
0x01 |
|
0x62 |
Parameter 1 Data Type |
0x12 (Cause Indicators) |
|
0x63 |
Parameter 1 Data Length |
0x02 (Cause Indicators) |
|
0x64 |
Parameter 1 Data[0] |
0x80 (Location=User) |
|
0x65 |
Parameter 1 Data[1] |
0X9F (Cause 31=Normal, Unspecified) |
|
0x66 – 0x6D |
Unused |
0X00 |
|
Blocking (BLO) |
||
|
0x6E |
Information Length |
0x02 |
|
0x6F |
Message ID |
0x13 (BLO) |
|
0x70 |
Number of Parameters |
0x00 |
|
0x71– 0x72 |
Unused |
0x00 |
|
Unblocking (UBL) |
||
|
0x73 |
Information Length |
0x02 |
|
0x74 |
Message ID |
0x14 (UBL) |
|
0x75 |
Number of Parameters |
0x00 |
|
0x76– 0x81 |
Unused |
0x00 |
|
Initial Address Message (IAM) |
||
|
0x82 |
Information Length |
0x0F |
|
0x83 |
Message ID |
0x01 (IAM) |
|
0x84 |
Number of Parameters |
0x04 |
|
0x85 |
Parameter 1 ID |
0x06 (Nature of Connection) |
|
0x86 |
Parameter 1 Data Length |
0x01 |
|
0x87 |
Parameter 1 Data[0] |
0x04 - enables continuity on the outgoing side 0x08 - enables continuity of the previous circuit Refer to Spec. Q.763 parameter 0x06 Nature of Connection, Paragraph 3.35 for full explanation of all bits. |
|
0x88 |
Parameter 2 ID |
0x07 (Forward Call Indicators) |
|
0x89 |
Parameter 2 Data Length |
0x02 |
|
0x8A |
Parameter 2 Data[0] |
0x22 (Call=National End-End=Pass along method available Interworking=None Segmentation=None ISUP=All the Way Preference=ISUP)
|
|
0x8B |
Parameter 2 Data[1] |
0x00 (Original Access=Non-ISDN SCCP Method=No Indicator Called Number=No Translate QOR=No Attempt) |
|
0x8C |
Parameter 3 ID |
0x09 (Calling Party Category) |
|
0x8D |
Parameter 3 Data Length |
0x01 |
|
0x8E |
Parameter 3 Data[0] |
0x0A |
|
0x8F |
Parameter 4 ID |
0x02 (Transmission Medium Requirements) |
|
0x90 |
Parameter 4 Data Length |
0x01=Speech |
|
0x91 |
Parameter 4 Data[0] |
0x00=Speech |
|
0x92 to 0xA6 |
Unused or User-Defined |
|
|
0xA7 |
If PPL Event Request of ANM is sent to L3P to automatically put, L4 in the answer state. |
0 - Do not put L4 in answered state automatically (default) 1 - Put L4 in answered state automatically |
|
0xA8-0xC8 |
Unused or User-Defined |
|
Block 2
The table below shows the config bytes for Block 2.
|
Byte |
Description |
Value |
|---|---|---|
|
Call Modification Request (CMR) |
||
|
0x00-0x45 |
Unsed or User-Defined |
|
|
0x46 |
Information Length |
0x05 |
|
0x47 |
Message ID |
0x1C (CMR) |
|
0x48 |
Parameter Counts |
0x01 |
|
0x49 |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
|
0x4A |
Parameter 1 Data Length |
0x01 |
|
0x4B |
Parameter 1 Data[0] |
0x01 |
|
Call Modification Complete (CMC) |
||
|
0x50 |
Information Length |
0x05 |
|
0x51 |
Message ID |
0x1D (CMC) |
|
0x52 |
Parameter Count |
0x01 |
|
0x53 |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
|
0x54 |
Parameter Data Length |
0x01 |
|
0x55 |
Parameter 1 Data[0] |
0x01 |
|
Call Modification Reject (CMRJ) |
||
|
0x5A |
Information Length |
0x05 |
|
0x5B |
Message ID |
0x1E (CMRJ) |
|
0x5C |
Parameter Count |
0x01 |
|
0x5D |
Parameter 1 ID |
0x17 (Call Modification Indicators) |
|
0x5E |
Parameter 1 Data Length |
0x01 |
|
0x5F |
Parameter 1 Data[0] |
0x01 |
|
User Part Test (TPT) |
||
|
0x64 |
Information Length |
0x06 |
|
0x65 |
Message ID |
0x34 (UPT) |
|
0x66 |
Number of Parameters |
0x01 |
|
0x67 |
Parameter 1 ID |
0x39 (Parameter Compatibility Information) |
|
0x68 |
Parameter 1 Length |
0x02 |
|
0x69 |
Parameter 1 Data[0] |
0x39 |
|
0x6A |
Parameter 1 Data[1] |
0x00 (Not Used) |
|
Calling Party Clear (CCL) (China ISUP) |
||
|
0x6E |
Information Length |
0x06 |
|
0x6F |
Message ID |
0xFC (CCL) |
|
0x70 |
Number of Parameters |
0x01 |
|
0x71 |
Parameter 1 ID |
0x38 (Message Compatibility Information) |
|
0x72 |
Parameter 1 Length |
0x02 |
|
0x73 |
Parameter 1 Data[0] |
0xFC (Transit Interp, Do Not Release Call, Notify, Discard Message) |
|
0x74 |
Parameter 1 Data[1] |
0x00 |
|
Operator (OPR) (China ISUP) |
||
|
0x78 |
Information Length |
0x06 |
|
0x79 |
Message ID |
0xFE (OPR) |
|
0x7A |
Number of Parameters |
0x01 |
|
0x7B |
Parameter 1 ID (Message Compatibility Information) |
0x38 (Message Compatibility Information) |
|
0x7C |
Parameter Length |
0x02 |
|
0x7D |
Parameter Data[0] |
0xFE (Transit Interp, Do Not Release Call, Notify, Discard Message) |
|
0x7E |
Parameter Data[1] |
0x00 (Not Used) |
|
Forward Transfer (FOT) |
||
|
0x82 |
Information Length |
0x02 |
|
0x83 |
Message ID |
0x08 (FOT) |
|
0x84 |
Number of Parameters |
0x00 |
|
Delayed Release (DRS) |
||
|
0x8C |
Information Length |
0x02 |
|
0x8D |
Message ID |
0x27 (DRS) |
|
0x8E |
Number of Parameters |
0x00 |
|
Meter Pulse Message (MPM) (China ISUP) |
||
|
0x96 |
Information Length |
0x06 |
|
0x97 |
Message ID |
0xFD (MPM) |
|
0x98 |
Number of Parameters |
0x01 |
|
0x99 |
Parameter 1 ID |
0xFE (Charge Information) |
|
0x9A |
Parameter 1 Length |
0x02 |
|
0x9B |
Parameter 1 Data[0] |
0x01 |
|
0x9C |
Parameter 1 Data[1] |
0x00 |
Block 3
The table below shows the config bytes for Block 3.
|
Byte |
Description |
Value |
|---|---|---|
|
Circuit Query Message (CQM) |
||
|
0x01 |
Information Length |
0x04 |
|
0x02 |
Message ID |
0x00 (CQM) |
|
0x03 |
Number Of Parameters |
0x01 |
|
0x04 |
Parameter 1 ID |
0x16 (Range and Status) |
|
0x05 |
Parameter 1 Data Length |
0x00 |
|
Facility Request (FAR) |
||
|
0x0B |
Information Length |
0x05 |
|
0x0C |
Message ID |
0xIF(FAR) |
|
0x0D |
Number Of Parameters |
0x01 |
|
0x0E |
Parameter 1 ID |
0x18 (Facility Indicator) |
|
0x0F |
Parameter 1 Data Length |
0x01 |
|
0x10 |
Parameter 1 Data[0] |
0x02 (User-to-User Services) |
|
Facility Accept (FAA) |
||
|
0x11 |
Information Length |
0x05 |
|
0x12 |
Message ID |
0x20 (FAA) |
|
0x13 |
Number Of Parameters |
0x01 |
|
0x14 |
Parameter 1 ID |
0x18 (Facility Indicator) |
|
0x15 |
Parameter 1 Data Length |
0x01 |
|
0x16 |
Parameter 1 Data[0] |
0x02 (User-to-User Service) |
|
Facility Reject (FRJ) |
||
|
0x17 |
Information Length |
0x09 |
|
0x18 |
Message ID |
0x21 (FRJ) |
|
0x19 |
Number Of Parameters |
0x02 |
|
0x1A |
Parameter 1 ID |
0x18 (Facility Indicator) |
|
0x1B |
Parameter 1 Data Length |
0x01 |
|
0x1C |
Parameter 1 Data[0] |
0x02 (User-to-User Service) |
|
0x1D |
Parameter 2 ID |
0x12 (Cause Indicators) |
|
0x1E |
Parameter 2 Data Length |
0x02 |
|
0x1F |
Parameter 2 Data [0] |
0x80 (Location=User) |
|
0x20 |
Parameter 2 Data [1] |
0xC5 (Cause 69=Requested Facility Not Implemented) |
|
Facility (FAC) |
||
|
0x21 |
Information Length |
0x02 |
|
0x22 |
Message ID |
0x33 (FAC) |
|
0x23 |
Number Of Parameters |
0x00 |
|
User (USR) |
||
|
0x24 |
Information Length |
0x06 |
|
0x25 |
Message ID |
0x2D (USR) |
|
0x26 |
Number Of Parameters |
0x01 |
|
0x27 |
Parameter 1 ID |
0x20 (User-to-User Information) |
|
0x28 |
Parameter 1 Data Length |
0x02 |
|
0x29 |
Parameter 1 Data[0] |
0xFF (All 1s) |
|
0x2A |
Parameter 1 Data[1] |
0xFF (All 1s) |
|
0x2B |
Unused |
|
|
Network Resource Management (NRM) |
||
|
0x2C |
Information Length |
0x05 |
|
0x2D |
Message ID |
0x32 (NRM) |
|
0x2E |
Number Of Parameters |
0x01 |
|
0x2F |
Parameter 1 ID |
0x37 (Echo Control Information) |
|
0x30 |
Parameter 1 Data Length |
0x01 |
|
0x31 |
Parameter 1 Data |
0x55 (Out Device Not Included/Not Available, In Device Not Included/Not Available, Out Device Activation Request, In Device Activation Request) |
|
Pass Along Message (PAM) |
||
|
0x32 |
Information Length |
0x01 |
|
0x33 |
Message ID |
0x28 (PAM) |
|
Identification Request (IDR) |
||
|
0x35 |
Information Length |
0x02 |
|
0x36 |
Message ID |
0x36 (IDR) |
|
0x37 |
Number Of Parameters |
0x00 |
|
Identification Response (IRS) |
||
|
0x38 |
Information Length |
0x02 |
|
0x39 |
Message ID |
0x37 (IRS) |
|
0x3A |
Number Of Parameters |
0x00 |
|
Information Request (INR) |
||
|
0x3B |
Information Length |
0x06 |
|
0x3C |
Message ID |
0x03 (INR) |
|
0x3D |
Number Of Parameters |
0x01 |
|
0x3E |
Parameter 1 ID |
0x0E (Information Request Indicator) |
|
0x3F |
Parameter 1 Data Length |
0x02 |
|
0x40 |
Parameter 1 Data[0] |
0x01 (Calling Party Address Requested, Holding Not Requested, Calling Party’s Category Not Requested, Charge Information Not Requested) |
|
0x41 |
Parameter 1 Data[1] |
0x00 (Not Used) |
|
Information (INF) |
||
|
0x42 |
Information Length |
0x06 |
|
0x43 |
Message ID |
0x04 (INF) |
|
0x44 |
Number Of Parameters |
0x01 |
|
0x45 |
Parameter 1 ID |
0x0f (Information Indicator) |
|
0x46 |
Parameter 1 Data Length |
0x02 |
|
0x47 |
Parameter 1 Data[0] |
0x00 (Calling Party Address Not Included, Hold Not Provided, Calling Party’s Category Not Included, Charge Information Not Included, Solicited) |
|
0x48 |
Parameter 1 Data[1] |
0x00 (Not used) |
|
Charge (CRG) |
||
|
0x49 |
Information Length |
0x02 |
|
0x4A |
Message ID |
0x31 (CRG) |
|
0x4B |
Number Of Parameters |
0x00 |
|
Subsequent Address Message (SAM) |
||
|
0x4C |
Information Length |
0x06 |
|
0x4D |
Message ID |
0x02 (SAM) |
|
0x4E |
Number Of Parameters |
0x01 |
|
0x4F |
Parameter 1 ID |
0x05 (Subsequent Number) |
|
0x50 |
Parameter 1 Data Length |
0x02 |
|
0x51 |
Parameter 1 Data[0] |
0x80 (Odd Number of Address Signals) |
|
0x52 |
Parameter 2 Data[1] |
0x0F (ST-End of Digits) |
|
Suspend (SUS) |
||
|
0x55 |
Information Length |
0x05 |
|
0x56 |
Message ID |
0x0D (SUS) |
|
0x57 |
Number Of Parameters |
0x01 |
|
0x58 |
Parameter 1 ID |
0x22 (Suspend/Resume Indicators) |
|
0x59 |
Parameter 1 Data Length |
0x01 |
|
0x5A |
Parameter 1 Data[0] |
0x01 (Network Initiated) |
|
Resume (RES) |
||
|
0x5C |
Information Length |
0x05 |
|
0x5D |
Message ID |
0x0E (RES) |
|
0x5E |
Number Of Parameters |
0x01 |
|
0x5F |
Parameter1 ID |
0x22 (Suspend/Resume Indicators) |
|
0x60 |
Parameter 1 Data Length |
0x01 |
|
0x61 |
Parameter 1 Data[1] |
0x01 (Network Initiated) |
|
0x64-0xC8 |
See Table below. |
|