Byte |
Description |
Value |
---|---|---|
0x01 |
Answer Type |
0x00=ANC (default) |
0x02 |
CCL Reception Processing Options |
0x00=Auto-reply w/ CBK (default) |
0x03 |
Outgoing Call Release Option |
0x00=CLF (default) |
0x04 |
0x00=BLK/UBL (default) |
|
0x05 |
CBK Reception Processing Options |
0x00=Auto-reply with CLF (default) |
0x06 |
RFS Format |
0x00=TUP Fields (default) |
0x07 |
Send ACM PPL Event to host |
0x00=Do Not Send (default) |
0x08 |
Send Answer PPL Event to host |
0x00=Do Not Send (default) |
0x09 |
Outgoing Congestion Control |
0x00 - Disable 0x01 - Enable (default) |
0x0A |
Enable/Disable PPL Event Indication sending to host. 1=Send PPL Event Indication to host. If this byte is set to "1", all the block/unblock acknowledgments and reset complete indications (RLG) will be sent to the host. |
0x00 NOTE: Config Byte 0x0A is used only for China TUP customized PPLs. |
0x0B |
Send Auto ACM 0=Wait for Host initiated ACM |
0x00 |
0x0C-0x0E |
Unused |
|
0x0F |
Field ID of Called Party Address |
0x03 |
0x10 |
Field ID of Calling Line ID |
0x08 |
0x11 |
Address Indicator for Calling Line ID |
00x0 |
0x12-0x13 |
Unused |
|
Address Complete Message (ACM) |
||
0x14 |
Number of Fields |
0x01 |
0x15 |
ACM Message Indication Fields |
0x0C |
0x16 |
Field Length |
0x01 |
0x17 |
Field Data |
0x00 |
0x18-0x1D |
Unused |
|
General Request Message (GRQ) |
||
0x1E |
Number of Fields |
0x01 |
0x1F |
GRQ Message Indication Fields |
0x0D |
0x20 |
Field Length |
0x01 |
0x21 |
Field Data |
0x00 |
0x22-0x27 |
Unused |
|
Automatic Congestion Control Message (ACC) |
||
0x28 |
Number of Fields |
0x01 |
0x29 |
ACC Message Indication Fields |
0x13 |
0x2A |
Field Length |
0x01 |
0x2B |
When set will cause a REL to be sent to the network prior to transitioning into the In Service Protocol. |
0x00 (default) |
0x2C-0x31 |
Unused |
|
Extended Unsuccessful Backward Setup Information Message (EUM) |
||
0x32 |
Number of Fields |
0x02 |
0x33 |
EUM Octet Indication Fields |
0x14 |
0x34 |
Field Length |
0x01 |
0x35 |
Field Data |
0x01 |
0x36 |
SPC |
0x15 |
0x37 |
Field Length |
0x02 |
0x38 |
Field Data |
0x00 |
0x39 |
Field Data |
0x00 |
0x3A-0x3B |
Unused |
|
Initial Address Message (IAM) |
||
0x3C |
Number of Fields |
0x02 |
0x3D |
Calling Party Category |
0x01 |
0x3E |
Field Length |
0x01 |
0x3F |
Field Data |
0x0A |
0x40 |
Field ID |
0x02 - Call Setup Message Indicators |
0x41 |
Field Length |
0x02 |
0x42 |
Field Data |
0x00 |
0x43 |
Field Data |
0x00 |
0x44-0x4F |
Unused |
|
Initial Address Message with Initial Information (IAI) |
||
0x50 |
Number of Fields |
0x02 |
0x51 |
Calling Party Category |
0x01 |
0x52 |
Field Length |
0x01 |
0x53 |
Field Data |
0x0A |
0x54 |
Field ID |
0x02 - Call Setup Message Indicators |
0x55 |
Field Length |
0x02 |
0x56 |
Field Data |
0x00 |
0x57 |
Field Data |
0x00 |