|
Event ID |
Event |
|---|---|
|
0x01F5 |
ACI Received |
|
0x01F6 |
SAM Received |
|
0x01F7 |
FAM Received |
|
0x01F8 |
Undefined Message Received |
|
0x01F9 |
Call Connected Indication |
|
0x01FA |
SND Received |
|
0x01FB |
CNG Received |
|
0x01FC |
CNA Received |
|
0x01FD |
RAM Received |
|
0x01FE |
SEM Received |
|
0x01FF |
SAD Received |
|
0x0200 |
CFN Received |
|
0x0201 |
Error, timer expired sending ACI request |
|
0x0202 |
Error, timer expired sending SASUI request |
|
0x0203 |
ASUI Received |
|
0x0204 |
SASUI Received |
|
0x0205 |
IAM Received |
|
0x0206 |
IFAM Received |
|
0x0207 |
ACM Received |
|
0x0208 |
TCM Received |
|
0x0209 |
SOO Received |
|
0x020A |
ANS Received |
|
0x020B |
CLR Received |
|
0x020C |
RAN Received |
|
0x020D |
REL Received |
|
0x020E |
CCF Received |
|
0x020F |
OLM Received |
|
0x0210 |
BLA Received |
|
0x0211 |
UBA Received |
|
0x0212 |
BLO Received |
|
0x0213 |
UBL Received |
|
0x0214 |
Circuit already Blocked |
|
0x0215 |
Circuit Not Blocked |
|
0x0216 |
Remote Block Indication, Circuit already Blocked |
|
0x0217 |
Remote Unblock Indication, Circuit not Blocked |
|
0x0218 |
Error Timer Expired, Sending CNA |
|
0x0219 |
Network ANS received before ACM |
|
0x021A |
SSM Received |
|
0x021B |
SER Received |
|
0x021C |
ECM Received |
|
0x021D |
CFC Received |
|
0x021E |
OOR Received |
|
0x021F |
HLR Received |
|
0x0220 |
SIM Received |
|
0x0221 |
SUS Received |
|
0x0222 |
RES Received |
|
0x0223 |
SWAP Received |
L3P BT IUP to Host--Access Denied Message
Whenever L3P BT IUP sends an Access Denied message to Call Control, two arguments are included: Reason and Call Status.
The table below shows the Reasons that may be sent to the host with Access Denied messages. When placing an outbound call, L3P BT IUP may determine that the call cannot be completed. When this occurs, an Access Denied message is sent to the host with the Reason fields encoded.
Reasons for Access Denied Messages
:
|
Reason |
Description |
|---|---|
|
0x1B |
|
|
0x1C |
Outseize Failure, Glare detected. |
|
0x25 |
Invalid Encoding Format |
|
0x59 |
Outseize Failure, Call Blocked. |
Call Status Values:
|
Call Status |
Description |
|---|---|
|
0x00 |
Call Inactive |
|
0x01 |
Call Active. Call is already established on this channel. |