Sample Routing TLV Configurations

You are here: CSP Developer’s Guide: Overview > 11 Call Routing > Sample Routing TLV Configurations

This section includes examples of PPL Config Byte configurations of the CH component required for various routing methods.

Terminating Channel Routing

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).

• Byte 21 configures the Routing Flag to Use Internal Router (0x01).

• TLV 1: Bytes 51–54 configure the Routing Method to Terminating Channel (0x09).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–62 configure the value of the Terminating Span/Channel.

Table 11-1 PPL Config Byte Configuration

BYTE	Description	Value
20	Outseize Method	0x00 - Send Call Request to L4
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x03
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x09 (Terminating Channel or Node)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x09 (Terminating Channel or Node)
59	TLV 3 Data Length	0x03
60	TLV 3 Data[0] Terminating Span MSB
61	TLV 3 Data[1] Terminating Span LSB
62	TLV 3 Data[2] Terminating Channel

Terminating Resource Group Routing

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).

• Byte 21 configures the Routing Flag to Use Internal Router (0x01).

• TLV 1: Bytes 51–54 configure the Routing Method to Terminating Resource Group (0x15).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 configure the value of the Terminating Resource Group ID.

Table 11-2

BYTE	Description	Value
20	Outseize Method	0x00 - Send Call Request to L4
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x03
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x15 (Terminating Resource Group)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x15 (Terminating Resource Group)
59	TLV 3 Data Length	0x02
60	TLV 3 Data[0] Resource Group MSB
61	TLV 3 Data[1] Resource Group LSB

PPL Config Bytes

Terminating Span/Channel Offset Routing

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00).

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Span/Channel Offset (0x0B).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–62 configure the value of the Terminating Span/Channel Offset.

Table 11-3

BYTE	Description	Value
20	Outseize Method	0x00 - Send Call Request to L4
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x03
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x09 (Terminating Channel)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x0E (Span/Channel Offset)
59	TLV 3 Data Length	0x03
60	TLV 3 Data[0] Terminating Span Offset MSB
61	TLV 3 Data[1] Terminating Span Offset LSB
62	TLV 3 Data[2] Terminating Channel Offset

PPL Config Byte Configuration

Route Group Routing with Address Digits

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Route Group (0x06).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 indicate the Route Group ID.

• TLV 4: Bytes 62–65 indicate the stage and string number for the address digits.

Table 11-4

BYTE	Description	Value
20	Outseize Method	0x00 - Send Outseize Control to L3
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x04
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x06 (Route Group)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x06 (Route Group)
59	TLV 3 Length	0x02
60	TLV 3 Data[0] Route Group ID MSB
61	TLV 3 Data[1] Route Group ID LSB
62	TLV 4 Tag	0x01 (Address Digits)
63	TLV 4 Data Length	0x02
64	TLV 4 Data[0] Stage #	0x01
65	TLV 4 Data[1] String #	0x01

Sample PPL Config Byte Configuration

Terminating Channel Routing with Called Party Digits

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Terminating Channel (0x09).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 indicate the criteria type of Address Digits 1 (0x01).

• TLV 4: Bytes 62–65 indicate the stage and string number of the address digits.

Table 11-5 Sample PPL Config Byte Configuration

BYTE	Description	Value
20	Outseize Method	0x00 - Send Outseize Control to L3
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x04
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x09 (Terminating Channel)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x08 (Criteria)
59	TLV 3 Length	0x02
60	TLV 3 Data[0] Criteria Type MSB	0x00
61	TLV 3 Data[1] Criteria Type LSB	0x01 (Address Digits 1)
62	TLV 4 Tag	0x01 (Address Digits)
63	TLV 4 Data Length	0x02
64	TLV 4 Data[0] Stage #	0x01
65	TLV 4 Data[1] String #	0x01

Incoming Channel Routing

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Terminating Channel (0x09).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 indicate the criteria type of Incoming Channel (0x07).

• TLV 4: Bytes 62–65 indicate the stage and string number of the address digits.

• TLV 5: Bytes 66–68 are the Incoming Channel TLV. No data is required.

Table 11-6 Sample PPL Config Byte Configuration

Byte	Description	Value
20	Outseize Method	0x00 - Send Outseize Control to L3
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x05
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x09 (Terminating Channel)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x08 (Criteria)
59	TLV 3 Length	0x02
60	TLV 3 Data[0] Criteria Type MSB	0x00
61	TLV 3 Data[1] Criteria Type LSB	0x07 (Incoming Channel)
62	TLV 4 Tag	0x01 (Address Digits 1)
63	TLV 4 Data Length	0x02
64	TLV 4 Data[0] Stage #	0x01
65	TLV 4 Data[1] String #	0x01
66	TLV 5 Tag	0x07 (Incoming Channel)
67	TLV 5 Length	0x01
68	TLV 5 Data[0]	X (Reserved)

Incoming Resource Group Routing

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Criteria (0x08).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 indicate the criteria type of Incoming Resource Group (0x10).

• TLV 4: Bytes 62–65 indicate the Incoming Resource Group ID.

• TLV 5: Bytes 66–68 indicate the stage and string number of the address digits.

Table 11-7 Sample PPL Config Bytes Configuration

Byte	Description	Value
20	Outseize Method	0x00 - Send Outseize Control to L3
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x03
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x08 (Criteria)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x08 (Criteria Type)
59	TLV 3 Length	0x02
60	TLV 3 Data[0] Criteria Type MSB	0x00
61	TLV 3 Data[1] Criteria Type LSB	0x10 (Incoming Resource Group)
62	TLV 4 Tag	0x10 (Incoming Resource Group ID)
63	TLV 4 Length	0x02
64	TLV 4 Data[0] Incoming Resource Group ID MSB
65	TLV 4 Data[1] Incoming Resource Group ID LSB
66	TLV 5 Tag	0x01 (Address Digits 1)
67	TLV 5 Data Length	0x02
68	TLV 5 Data[0] Stage #	0x01
69	TLV 5 Data[1] String #	0x01

Incoming Resource Group Routing with Multiple Criteria
(Address Digit Type 2)

The example in the table below shows the following PPL Config Byte configuration:

• Byte 20 configures the Outseize Method to Send Call Request to Layer 4 (0x00)

• Byte 21 configures the Routing Flag to Use Internal Router (0x01)

• TLV 1: Bytes 51–54 configure the Routing Method to Criteria (0x08).

• TLV 2: Bytes 55–57 configure the Router Protocol ID to 0x0B, which is the default and the only protocol currently supported.

• TLV 3: Bytes 58–61 indicate the criteria type of Incoming Resource Group (0x10).

• TLV 4: Bytes 62–65 indicate the Incoming Resource Group ID.

• TLV 5: Bytes 66–69 indicate the stage and string number of the address digits for digit type 1.

• TLV 6: Bytes 70–73 is a Multiple Criteria TLV (0x0C) indicating the criteria type of Address Digits Type 2 (0x02).

• TLV 7: Bytes 74–77 indicate the stage and string number of the address digits for digit type 2

Table 11-8 PPL Config Bytes Configuration.

Byte	Description	Value
20	Outseize Method	0x00 - Send Outseize Control to L3
21	Routing Flag	0x01 - Use Internal Router
50	TLV Count	0x07
51	TLV 1 Tag	0x13 (Routing Method)
52	TLV 1 Data Length	0x02
53	TLV 1 Data[0] Routing Method (MSB)	0x00
54	TLV 1 Data[1] Routing Method (LSB)	0x09 (Terminating Channel)
55	TLV 2 Tag	0x0F (Protocol ID)
56	TLV 2 Length	0x01
57	TLV 2 Data[0] Protocol ID	0x0B (Default)
58	TLV 3 Tag	0x08 (Criteria)
59	TLV 3 Length	0x02
60	TLV 3 Data[0] Criteria Type MSB	0x00
61	TLV 3 Data[1] Criteria Type LSB	0x10 (Incoming Resource Group)
62	TLV 4 Tag	0x10 (Incoming Resource Group ID)
63	TLV 4 Length	0x02
64	TLV 4 Data[0] Incoming Resource Group MSB
65	TLV 4 Data[1] Incoming Resource Group LSB
66	TLV 5 Tag	0x01 (Address Digits 1)
67	TLV 5 Data Length	0x02
68	TLV 5 Data[0] Stage #	0x01
69	TLV 5 Data[1] String #	0x01
70	TLV 6 Tag	0x0C (Multiple Criteria)
71	TLV 6 Length	0x02
72	TLV 6 Data[0] Criteria Type MSB	0x00
73	TLV 6 Data[1] Criteria Type LSB	0x02 (Digit Type 2)
74	TLV 7 Tag	0x02 (Address Digits 2)
75	TLV 7 Data Length	0x02
76	TLV 7 Data[0] Stage #	0x02
77	TLV 7 Data[1] String #	0x01