0x01E9 Destination RTCP Port

Use this TLV to specify the remote RTCP port number for the fax relay. This TLV can be set on-the-fly. If this port is not specified by the host during the call setup, per RFC 1889, by default the destination RTCP port is at an offset of 1 from the destination RTP port.

Used in:
0x1E Generic PPL ICB in:
Resource Attribute Configure message
Route Control message
Outseize Control message

Byte

Description

0, 1

Tag 0x01E9

2, 3

Length 0x0002

4, 5

Value[0] RTCP Port