Byte

Description

0, 1

Tag: 0x0750 - Dial Pulse Detection Parameters

2, 3

Length: 0x000A

4, 5

Value[0, 1]: Low Threshold Level - The sample level required to be below in order to declare sample as a Low Signal

Default - 0x1388 (5000)

6, 7

Value[2, 3]: Low Threshold Count - The number of consecutive low samples to be considered a post Dial Pulse Low

Default - 0x0011 (17)

8, 9

Value[4, 5]: Peak Threshold - The sample value required for a signal to be declared a Dial Pulse Peak

Default - 0x36B0 (14000)

10, 11

Value[6, 7]: Maximum Transition Count - The maximum low to high transition time (samples). For a peak to be declared, the ramp time has to be less than this number of samples.

Default - 0x7530 (30000)

12, 13

Value[8, 9]: Settle By Count: Number of consecutive samples that the signal must be below the low threshold to declare the signal as a dial pulse. Default - 0x0190 (400)