SS7 Signaling Link Configure 0x005E

SwitchKit Name

SS7SignalingLinkConfig

Type

EXS API and SwitchKit API message

Description

SS7 Signaling Link Configure 0x005E

This message defines a signaling link and assigns it to a link set. You can also use this message to subsequently deconfigure a signaling link.

Sent by

Host

Example Message (Socket Log Output for SwitchKit)

The following example message defines signaling link 0x05 on a primary SS7 card. The signaling link is assigned to link set 0x23. The link’s data rate is
64 Kbps rate and the electrical interface is V.35 DTE (Data Terminal Equipment).

00 14 00 5E 00 00 FF 00 02 1F 03 00 23 05 0D 03 00 01 17 01 00 01

SwitchKit Code

Configuration

SS7SignalingLinkConfig (

Node = integer,

StackID = integer,

LinkSetID = integer,

LinkID = integer,

Span = integer,

Channel = integer,

SLC = integer,

DataRate = integer,

ElectricalInterface = integer,

C Structure

typedef struct {

UBYTE AddrInfo[4];

UBYTE StackID;

UBYTE LinkSetID;

UBYTE LinkID;

unsigned short Span;

UBYTE Channel;

UBYTE SLC;

UBYTE DataRate;

UBYTE ElectricalInterface;

UBYTE Reserved;

} XL_SS7SignalingLinkConfig;

C++ Class

class XLC_SS7SignalingLinkConfig : public XLC_OutboundMessage {

public:

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

UBYTE getStackID() const;

void setStackID(UBYTE x);

UBYTE getLinkSetID() const;

void setLinkSetID(UBYTE x);

UBYTE getLinkID() const;

void setLinkID(UBYTE x);

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

UBYTE getSLC() const;

void setSLC(UBYTE x);

UBYTE getDataRate() const;

void setDataRate(UBYTE x);

UBYTE getElectricalInterface() const;

void setElectricalInterface(UBYTE x);

UBYTE getReserved() const;

void setReserved(UBYTE x);

};

EXS API Hex Format

Address Element

To configure and deconfigure a link, use a combination of the Link ID and Channel address type, as follows: