T1 Call Setup

T1 Call Setup

Tables E&M through FXO/GS show the ICB subtypes that are supported for each T1 protocol in these API messages:

• Inseize Instruction List Configure

• Outseize Instruction List Configure

• Inseize Control

• Outseize Control

Table 2-3 E&M

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default E&M protocol are the following:	The only valid inseize control Action ICBs used for the default E&M protocol are the following:
0x00 Null	0x00 Null
0x01 Scan for Wink N	0x01 Report Call Processing Event
0x02 Scan for ANI Request Off-hook	0x02 Generate Call Processing Event
0x04 Report Call Processing Event	0x03 Receive Stage N Address Data
0x05 Outpulse Stage N Address Data	0x04 Wait for Host Control
0x06 Wait for Host Address Data	0x05 Report Incoming Call
0x07 Wait for Host Control	0x06 Report Incoming Call with Digits
0x08 Send Host Acknowledgment	0x07 Generate Inseize Acknowledgment
0x09 Do Call Progress Analysis	0x08 Send Host Acknowledgment
0x0A Seize	0x09 Use Instruction List
0x0B Use Instruction List	0x0A Delay N ms
0x0F Wait for Host control with Answer
0x10 Do CPA Without Line Signaling
0x11 Delay N ms

Table 2-4 FXS/LS

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default FXS/LS protocol are the following:	The only valid inseize control Action ICBs used for the default FXS/LS protocol are the following:
0x00 Null	0x00 Null
0x07 Wait for Host Control	0x01 Report Call Processing Event
0x08 Send Host Acknowledgment	0x03 Receive Stage N Address Data
0x0A Seize	0x04 Wait for Host Control
0x0B Use Instruction List	0x05 Report Incoming Call
0x0F Wait for Host control with Answer	0x06 Report Incoming Call with Digits
0x11 Delay N ms	0x07 Generate Inseize Acknowledgment
	0x08 Send Host Acknowledgment
	0x09 Use Instruction List
	0x0A Delay N ms

Table 2-5 FXO/LS

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default FXO/LS protocol are the following:	The only valid inseize control Action ICBs used for the default FXO/LS protocol are the following:
0x00 Null	0x00 Null
0x03 Scan for Dial Tone	0x04 Wait for Host Control
0x04 Report Call Processing Event	0x05 Report Incoming Call
0x05 Outpulse Stage N Address Data	0x07 Generate Inseize Acknowledgment
0x06 Wait for Host Address Data	0x08 Send Host Acknowledgment
0x07 Wait for Host Control	0x09 Use Instruction List
0x08 Send Host Acknowledgment	0x0A Delay N Milliseconds
0x09 Do Call Progress Analysis
0x0A Seize
0x0B Use Instruction List
0x0F Wait for Host Control with Ans
0x11 Delay N Milliseconds

Table 2-6 FXS/GS

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default FXS/GS protocol are the following:	The only valid inseize control Action ICBs used for the default FXS/GS protocol are the following:
0x00 Null	0x00 Null
0x07 Wait for Host Control	0x01 Report Call Processing Event
0x08 Send Host Acknowledgment	0x03 Receive Stage N Address Data
0x0A Seize	0x04 Wait for Host Control
0x0B Use Instruction List	0x05 Report Incoming Call
0x0F Wait for Host Control with Answer	0x06 Report Incoming Call with Digits
0x11 Delay N ms	0x07 Generate Inseize Acknowledgment
	0x08 Send Host Acknowledgment
	0x09 Use Instruction List
	0x0A Delay N ms

Table 2-7 FXS/GS

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default FXS/GS protocol are the following:	The only valid inseize control Action ICBs used for the default FXS/GS protocol are the following:
0x00 Null	0x00 Null
0x07 Wait for Host Control	0x01 Report Call Processing Event
0x08 Send Host Acknowledgment	0x03 Receive Stage N Address Data
0x0A Seize	0x04 Wait for Host Control
0x0B Use Instruction List	0x05 Report Incoming Call
0x0F Wait for Host Control with Answer	0x06 Report Incoming Call with Digits
0x11 Delay N ms	0x07 Generate Inseize Acknowledgment
	0x08 Send Host Acknowledgment
	0x09 Use Instruction List
	0x0A Delay N ms

Table 2-8 FXO/GS

Outgoing	Incoming
The only valid outseize control Action ICBs used for the default FXO/GS protocol are the following:	The only valid inseize control Action ICBs used for the default FXO/GS protocol are the following:
0x00 Null	0x00 Null
0x03 Scan for Dial Tone	0x04 Wait for Host Control
0x04 Report Call Processing Event	0x05 Report Incoming Call
0x05 Outpulse Stage N Address Data	0x07 Generate Inseize Acknowledgment
0x06 Wait for Host Address Data	0x08 Send Host Acknowledgment
0x07 Wait for Host Control	0x09 Use Instruction List
0x08 Send Host Acknowledgment	0x0A Delay N ms
0x09 Do Call Progress Analysis
0x0A Seize
0x0B Use Instruction List
0x0F Wait for Host Control with Answer
0x11 Delay N ms