You are here: CSP API Reference > 1 EXS & SwitchKit API Messages > Clear IP Signaling Series 3 Card 0x0108
Clear IP Signaling Series 3 Card 0x0108
Type
EXS API message
Description
This message clears the system software on the IP Signaling Series 3 card before and/or after the IP Signaling Series 3 card interface is established. This message is sent directly to the IP Signaling Series 3 card and uses the extended logical node ID format.
To initiate the download of the new software load, you need to reset the IP Signaling Series 3 card by pushing the Reset button or using the Reset IP Signaling Series 3 Card message (0x0107).
Sent by
Example Message
The following clears the system software on the IP Signaling Series 3 card when the IP Signaling Series 3 card ID or Matrix ID is not assigned.
00 11 01 08 00 00 fe 00 02 52 02 ff ff 53 04 00 20 ff ff
Hex API Format
MESSAGE (White) |
RESPONSE (Gray) |
||
Byte |
Field Description |
Byte |
Field Description |
0 |
Frame (0xFE) |
0 |
Frame (0xFE) |
1, 2 |
Length (0xNNNN) |
1, 2 |
Length (0xNNNN) |
3, 4 |
Message Type (0x0108) |
3, 4 |
Message Type (0x0108) |
5 |
Reserved (0x00) |
5 |
Reserved (0x00) |
6 |
Sequence Number |
6 |
Sequence Number (same as message) |
7 |
Extended Logical Node ID (0xFE) |
7 |
Extended Logical Node ID (0xFE) |
: |
Address Method 0x00 - Individual AEs |
8, 9 |
|
Number of AEs to follow |
|||
AEs 0x52 IP Signaling Series 3 Card ID or Expanded Logical Node ID |
|||
: |
Checksum |
: |
AIB Same as message |
: |
Checksum |