0x09CC Add Global Title Entry

This TLV is used to add Global Title (GT) entries. It is not used for Global Title Translation (GTT) immediately. You can configure multiple GT entries before you activate them using the 0x09CE Build Index Table.

These newly configured GT entries are stored on the SS7 card but do not take effect until the SS7 card receives the Build Index command.

You can add 1,000 GT entries at a time up to a maximum of 100,000 for an SS7 card. If you configure GT entries after exceeding this maximum, you will receive the error code 0x552D. When the GT entry has been in the Active GT table you will receive the error code 0x5529. When the GT entry has been Standby GT table you will receive the error code 0x5528.

Used in:
SS7 SCCP TCAP Configure message

Byte

Description

0, 1

Tag 0x09CC Add Global Title Entry

2, 3

Length Variable

4

Value[0] Group ID

1-127

5

Value [1] Entry Attribute

Bit 0 - Wild Card bit

0 Non-Wild Card GT

1 Wild Card GT

 

Bits 1-7 Not Used.

6

Reserved for future use.

7

Value [2] Global Title Address Information Length

1-24 digits

:

Value [n] Global Title Address Information (GTAI)

See Global Title Address Information Format for format.

:

Value [n] Translation Result Option

00 Single translation result

01 Double translation results, working in Active
Standby Mode

02 Double translation results, working in Load
Sharing Mode

:

Value [n] Translation Result 1

 

See Translation Result Format.

Table 4-1 Global Title Address Information Format

Byte

Bits: 7 6 5 4

Bits: 3 2 1 0

0

Second digit

First Digit

1

Fourth Digit

Third Digit

:

 

 

N

(M+1)th Digit

Mth Digit

Table 4-2 Translation Result Format

Byte

Field Name

Description

N

Translation Result Length

 

N+1

Translation Result Format

Four formats:

00: RI + PC
01: RI+PC+SSN
02: RI+PC+GT
03: RI+PC+SSN+GT

N+2

Routing Indicator

00: Route on GT
01: Route on SSN

N+3
-
N+6

Point Code

 

If (N+1)Byte=0x01 RI+PC+SSN

N+7

Subsystem Number

 

If (N+1) Byte = 0x02 RI+PC+GT

N+7

Global Title

See Global Title Format below.

If (N+1) Byte=0x03 RI+PC+SSN+GT

N+7

Subsystem Number

 

N+8
-
...

Global Title

See Global Title Format below.

 

Table 4-3 Global Title Format

Byte

Field

Description

N

GTI

Global Title Indicator

Range: 1-15

N+1

GT Content Length

Range: 1-24

N+2

GT Content

Global Title Content