You are here: CSP Developer’s Guide: Overview > 9 Configuring the DSP-ONE Card > CPA Class Parameters
By default, the CSP uses the following four classes:
• 0x00 Standard North America
• 0x01 Dial Tone
• 0x02 CPC Detection
• 0x03 Energy Detection
The parameters associated with a CPA class are defined in CPA Class Parameters and Definitions. To modify a class or to add a new class, use the CPA Class Configure message. The CSP supports up to 15 classes. A class can contain up to 15 pattern members, and 30 patterns are allowed for each CSP. Class elements are given in Class Elements.
Table 9-19 CPA Class Parameters and Definitions
|
Class Parameter |
Definition |
|---|---|
|
Class Members |
Patterns that are included in the class |
|
Confirmation |
Amount of time to wait to detect a pattern |
|
Confirmation/No Report |
Amount of time after detection of a tone to wait for pattern confirmation before terminating CPA |
|
Continuous Silence Timeout |
Amount of time after CPA is initiated to wait to hear any tone |
|
Maximum On Timer |
The maximum amount of time a tone must be "on" without a pattern match before the "continuous on" result is reported |
|
Maximum Off Timer |
The maximum amount of time silence must be detected before the "not determined" result is reported; amount of time to validate a silence detection before declaring it as silence |
|
Minimum Frequency Glitch Time |
Amount of time to validate a tone detection |
|
Minimum Silence Glitch Time |
Amount of time to validate a silence detection |
|
Mode |
Call Progress Analysis Mode (for example, Advanced Answer Detect, Energy Detection) |
|
Mode Specific Values |
Values to configure for specific CPA mode |
|
Start Delay |
Amount of time to wait before analysis begins |
|
Tone Burst Answer Threshold |
The number of frequency bursts in 500ms before answer is declared |
|
Class |
Standard |
Dial Tone 0x01 |
CPC |
Energy |
|---|---|---|---|---|
|
Mode |
0x01 |
|
|
Energy Detection |
|
Tone Burst Answer Threshold |
4/250 ms |
|
|
4/500 ms |
|
Start Delay |
0x00 |
0x00 |
0x00 |
0x00 |
|
Continuous Silence |
25,000 |
25,000 |
0xFFFF |
25,000 |
|
Confirmation (ms) |
13,000 |
25,000 |
0xFFFF |
13,000 |
|
Confirmation /No Report (ms) |
22,000 |
15,000 |
0xFFFF |
22,000 |
|
Min. Frequency Glitch Time (ms) |
40 |
20 |
20 |
20 |
|
Min. Silence Glitch Time (ms) |
60 |
20 |
20 |
60 |
|
Maximum On Timer (ms) |
2,800 |
25,000 |
0xFFFF |
2,800 |
|
Maximum Off Timer (ms) |
5,000 |
25,000 |
0xFFFF |
5,000 |
|
Mode Specific 1 |
0x0000 |
0x0000 |
0x0000 |
0x0005 |
|
Mode Specific 2 |
0x0000 |
0x0000 |
0x0000 |
0x0002 |
|
Pattern Members |
0x01 Ringback |
0x0C PBX Dial Tone 0x0D Standard Dial Tone |
0x0E CPC Detection |
0x01 Ringback 0x02 Double Ringback 0x03 Busy 0x04 Reorder |