0x1E Generic PPL

This ICB is used in various scenarios including call routing and establishing IP calls.

Used in:

Route Control message
PPL Event Indication message
PPL Event Request message
Channel Release with Data message

ICB Type

0x02 (Data)

ICB ID

0x1E

Data Length

Total number of bytes below this line

Data[0, 1]

Total Number of TLVs

Data[2, 3]

TLV 1 Tag

Data[4, 5]

TLV 1 Length

Data[6]

TLV 1 Data[0]

Data[:]

:

Data[:]

TLV 1Data[n]

Data[2, 3]

TLV n Tag

Data[4, 5]

TLV n Length

Data[6]

TLV n Data[0]

Data[:]

:

Data[:]

TLV n Data[n]

TLVs

0x01 Add Virtual Card

0x0009 Terminating Channel

0x000F Router Protocol ID

0x0013 Routing Method

0x0065 Physical VoIP Channel

0x0071 Virtual VoIP Channel

0x0100 RTP Payload Type (VDAC-ONE)

0x0100 RTP Payload Type (IPN Series 2)

0x0102 RTP Silence Suppression

0x0103 RTP Echo Cancellation

0x0116 Channel Service TLV

0x0117 Alerting Propagation Mode

0x0118 Companding Conversion Mode

0x0119 Media Offer Stage

0x011A Call Agent Mode Physical Channel ID

0x01C2 Minimum Jitter Buffer Delay

0x01C3 Maximum Jitter Buffer Delay (IPN-2 Card)

0x01C4 Adaptation Rate

0x01C5 Fax Type Enable

0x01C7 Fax/Modem Bypass Coder Type

0x01C8 Protocol Type

0x01D1 RTP Payload Redundancy

0x01D2 Fax Payload Redundancy

0x01D4 Type of Service

0x01DF UDP Source Port Validate

0x01E1 Fax Compatibility Mode

0x01E2 RFC 2833 Enable

0x01E6 Source T.38 Port

0x01E7 Destination T.38 Port

0x01E8 Source RTCP Port

0x01E9 Destination RTCP Port
0x01EB RTP Timer Timeout (VDAC-ONE)

0x01EC Media Inactivity Detection Timer

0x11 Signaling Route Test Control Status

0x12 Signaling Route Test Control DPC