You are here: CSP Developer’s Guide: Line Cards > 2 T1 Information > T1 Call Setup
Tables E&M through FXO/GS show the ICB subtypes that are supported for each T1 protocol in these API messages:
• Inseize Instruction List Configure
• Outseize Instruction List Configure
• Inseize Control
• Outseize Control
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default E&M protocol are the following: |
The only valid inseize control Action ICBs used for the default E&M protocol are the following: |
0x00 Null |
0x00 Null |
0x01 Scan for Wink N |
0x01 Report Call Processing Event |
0x02 Scan for ANI Request Off-hook |
0x02 Generate Call Processing Event |
0x04 Report Call Processing Event |
0x03 Receive Stage N Address Data |
0x05 Outpulse Stage N Address Data |
0x04 Wait for Host Control |
0x06 Wait for Host Address Data |
0x05 Report Incoming Call |
0x07 Wait for Host Control |
0x06 Report Incoming Call with Digits |
0x08 Send Host Acknowledgment |
0x07 Generate Inseize Acknowledgment |
0x09 Do Call Progress Analysis |
0x08 Send Host Acknowledgment |
0x0A Seize |
0x09 Use Instruction List |
0x0B Use Instruction List |
0x0A Delay N ms |
0x0F Wait for Host control with Answer |
|
0x10 Do CPA Without Line Signaling |
|
0x11 Delay N ms |
|
Table 2-4 FXS/LS
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default FXS/LS protocol are the following: |
The only valid inseize control Action ICBs used for the default FXS/LS protocol are the following: |
0x00 Null |
0x00 Null |
0x07 Wait for Host Control |
0x01 Report Call Processing Event |
0x08 Send Host Acknowledgment |
0x03 Receive Stage N Address Data |
0x0A Seize |
0x04 Wait for Host Control |
0x0B Use Instruction List |
0x05 Report Incoming Call |
0x0F Wait for Host control with Answer |
0x06 Report Incoming Call with Digits |
0x11 Delay N ms |
0x07 Generate Inseize Acknowledgment |
|
0x08 Send Host Acknowledgment |
|
0x09 Use Instruction List |
|
0x0A Delay N ms |
Table 2-5 FXO/LS
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default FXO/LS protocol are the following: |
The only valid inseize control Action ICBs used for the default FXO/LS protocol are the following: |
0x00 Null |
0x00 Null |
0x03 Scan for Dial Tone |
0x04 Wait for Host Control |
0x04 Report Call Processing Event |
0x05 Report Incoming Call |
0x05 Outpulse Stage N Address Data |
0x07 Generate Inseize Acknowledgment |
0x06 Wait for Host Address Data |
0x08 Send Host Acknowledgment |
0x07 Wait for Host Control |
0x09 Use Instruction List |
0x08 Send Host Acknowledgment |
0x0A Delay N Milliseconds |
0x09 Do Call Progress Analysis |
|
0x0A Seize |
|
0x0B Use Instruction List |
|
0x0F Wait for Host Control with Ans |
|
0x11 Delay N Milliseconds |
|
Table 2-6 FXS/GS
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default FXS/GS protocol are the following: |
The only valid inseize control Action ICBs used for the default FXS/GS protocol are the following: |
0x00 Null |
0x00 Null |
0x07 Wait for Host Control |
0x01 Report Call Processing Event |
0x08 Send Host Acknowledgment |
0x03 Receive Stage N Address Data |
0x0A Seize |
0x04 Wait for Host Control |
0x0B Use Instruction List |
0x05 Report Incoming Call |
0x0F Wait for Host Control with Answer |
0x06 Report Incoming Call with Digits |
0x11 Delay N ms |
0x07 Generate Inseize Acknowledgment |
|
0x08 Send Host Acknowledgment |
|
0x09 Use Instruction List |
|
0x0A Delay N ms |
Table 2-7 FXS/GS
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default FXS/GS protocol are the following: |
The only valid inseize control Action ICBs used for the default FXS/GS protocol are the following: |
0x00 Null |
0x00 Null |
0x07 Wait for Host Control |
0x01 Report Call Processing Event |
0x08 Send Host Acknowledgment |
0x03 Receive Stage N Address Data |
0x0A Seize |
0x04 Wait for Host Control |
0x0B Use Instruction List |
0x05 Report Incoming Call |
0x0F Wait for Host Control with Answer |
0x06 Report Incoming Call with Digits |
0x11 Delay N ms |
0x07 Generate Inseize Acknowledgment |
|
0x08 Send Host Acknowledgment |
|
0x09 Use Instruction List |
|
0x0A Delay N ms |
Outgoing |
Incoming |
---|---|
The only valid outseize control Action ICBs used for the default FXO/GS protocol are the following: |
The only valid inseize control Action ICBs used for the default FXO/GS protocol are the following: |
0x00 Null |
0x00 Null |
0x03 Scan for Dial Tone |
0x04 Wait for Host Control |
0x04 Report Call Processing Event |
0x05 Report Incoming Call |
0x05 Outpulse Stage N Address Data |
0x07 Generate Inseize Acknowledgment |
0x06 Wait for Host Address Data |
0x08 Send Host Acknowledgment |
0x07 Wait for Host Control |
0x09 Use Instruction List |
0x08 Send Host Acknowledgment |
0x0A Delay N ms |
0x09 Do Call Progress Analysis |
|
0x0A Seize |
|
0x0B Use Instruction List |
|
0x0F Wait for Host Control with Answer |
|
0x11 Delay N ms |
|